Skip to main content

What Is Radon Mitigation and Why Do You Need to Care?

What Is Radon Mitigation and Why Do You Need to Care?Photo by Element5 Digital

Originally Posted On: What Is Radon Mitigation and Why Do You Need to Care? (homoq.com)

 

If you’re a homeowner or prospective buyer, then you may be wondering what is radon mitigation and why you should test your home. Since radon is a gas that naturally occurs in the ground, it’s not uncommon to find elevated levels within your home. However, radon is radioactive and can cause serious long term health issues, and needs to be dealt with swiftly.

Radon is the second leading cause of lung cancer in the US, and one out of every 15 homes across the country has radon levels over 4 pCi/L. While this may seem alarming, radon is easily mitigated, reducing the levels within your home.

If you’re interested in learning about radon mitigation system cost and the importance of this crucial system, then keep reading.

Testing for Radon

There are several ways to test for radon. If you have an offer on a house, have your home inspector test for radon. If you’re a homeowner, you can purchase a kit from a hardware store or hire a professional to come to your home and take samples.

The kit is placed in your home, usually 3 or more feet above ground level in your house. If you have a basement, that’s where it will likely go. You’ll need to leave the kit for a few days before sending it to a lab.

While the EPA recommends that any levels over 4 pCi/L be mitigated, no level of radon is acceptable and you should install a mitigation system if you find levels of any kind. Since prolonged exposure to radon can lead to serious health issues, including lung cancer, it should be taken seriously and a radon mitigation system should be installed.

Cost to Remediate

Installing a radon mitigation system is fast and cost-effective. On average, radon mitigation cost is $800 to $1,500 for a system. Be sure the contractor you hire is reputable with excellent reviews and is fully licensed and insured.

You’ll also need permits when installing a radon mitigation system, but these are usually obtained after completing the work since radon is toxic and, if found, needs remediation immediately. Permits can cost around $200 but are usually factored into the overall price.

In most situations, a radon remediation company such as Wasatch Radon will install a PVC pipe into a ground-level floor, allowing the radon to vent outside. There will be an exterior fan that helps push the radon out and away from your home. The whole installation takes only a few hours and will give you and your family years of clean air and peace of mind.

Remember that these systems don’t work in the event of a power outage, so you may need to open windows to help air your home out. You can purchase radon detectors to place around your house, allowing you to monitor your levels. These do not replace radon test kits, so be sure to have your home checked for radon every year, to ensure the proper functioning of your radon mitigation system.

Radon Mitigation for All Your Needs

Whether you need radon mitigation for residential or commercial use, be sure to install a radon mitigation system to reduce your exposure to this toxic gas. When exposed to radon for prolonged periods, serious health issues can arise, so don’t hesitate to install a radon mitigation fan.

For more articles about home improvement and repairs, then check out the rest of our website. We’ve got tons of informative blogs and articles for all your home and real estate needs.

Data & News supplied by www.cloudquote.io
Stock quotes supplied by Barchart
Quotes delayed at least 20 minutes.
By accessing this page, you agree to the following
Privacy Policy and Terms and Conditions.