As filed with the Securities and Exchange Commission on June 25, 2010

 

 

UNITED STATES SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

Form 20-F

 

 

Commission file number 1-13368

POSCO

(Exact name of Registrant as specified in its charter)

 

POSCO Center, 892 Daechi-4-dong, Gangnam-gu
Seoul, Korea 135-777
(Address of principal executive offices)

Choi, Dong-Min
POSCO Center, 892 Daechi-4-dong, Gangnam-gu,
Seoul, Korea 135-777
Telephone: +82-2-3457-0975; E-mail: dmchoi@posco.com; Facsimile: +82-2-3457-1982
(Name, telephone, e-mail and/or facsimile number and address of company contact person)

Securities registered or to be registered pursuant to Section 12(b) of the Act.

 

Securities registered or to be registered pursuant to Section 12(g) of the Act.
None
Securities for which there is a reporting obligation pursuant to Section 15(d) of the Act.
None

As of December 31, 2009, there were 77,032,878 shares of common stock, par value Won 5,000 per share, outstanding

(not including 10,153,957 shares of common stock held by the company as treasury shares)

 

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.  Yes þ     No o

 

If this report is an annual or transition report, indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934.  Yes o     No þ

 

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.  Yes þ     No o

 

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).  Yes o     No o

 

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, or a non-accelerated filer. See definition of “accelerated filer and large accelerated filer” in Rule 12b-2 of the Exchange Act. (Check one):

 

Large accelerated filer þ     Accelerated filer o     Non-accelerated filer o

 

Indicate by check mark which basis of accounting the registrant has used to prepare the financial statements included in this filing.  U.S. GAAP  o     IFRS  o     Other  þ

 

If “Other” has been checked in response to the previous question, indicate by check mark which financial statement item the registrant has elected to follow.  Item 17  o     Item 18  þ     

 

If this is an annual report, indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).  Yes  o     No  þ

 

 

 

TABLE OF CONTENTS

 

 

 

Any discrepancies in any table between totals and the sums of the amounts listed are due to rounding.

 

 

 

Not applicable

 

 

Not applicable

 

 

Not applicable

 

 

Not applicable

 

 

Not applicable

 

 

Not applicable

 

 

 

The selected financial data presented below should be read in conjunction with our Consolidated Financial Statements and related notes thereto and “Item 5. Operating and Financial Review and Prospects” included elsewhere in this annual report. The selected financial data as of December 31, 2008 and 2009 and for each of the three years in the period ended December 31, 2009 is derived from our Consolidated Financial Statements included elsewhere in this annual report. Our Consolidated Financial Statements are prepared in accordance with Korean GAAP, which differ in certain significant respects from U.S. GAAP.

INCOME STATEMENT DATA

 

 

BALANCE SHEET DATA

 

 

 

 

 

EXCHANGE RATE INFORMATION

 

The following table sets out information concerning the market average exchange rate for the periods and dates indicated.

 

 

 

Source: Seoul Money Brokerage Services, Ltd.

 

 

 

Not applicable

 

 

Not applicable

 

 

You should carefully consider the risks described below.

 

The global economic downturn in recent years has reduced worldwide demand for steel products and adversely affected our profitability. While the rate of deterioration of the global economy slowed in the second half of 2009 and into 2010, with some signs of stabilization and improvement, there can be no assurance that such recovery will continue.

 

Difficulties affecting the U.S. and global financial sectors, adverse conditions and volatility in the U.S. and worldwide credit and financial markets, fluctuations in oil and commodity prices and the general weakness of the U.S. and global economy have increased the uncertainty of global economic prospects in general and have adversely affected the global and Korean economies. The global

economic downturn in recent years has had a pronounced negative effect on the global demand for steel products and their prices. While the rate of deterioration of the global economy slowed in the second half of 2009 and into 2010, with some signs of stabilization and improvement, the overall prospects for the Korean and global economy in 2010 and beyond remain uncertain.

 

In response to sluggish demand from our customers in industries adversely impacted by the deteriorating global economic conditions in the second half of 2008, such as automotive and construction industries, we reduced our crude steel production and sales prices in December 2008 and the first quarter of 2009. Signs that the pace of deterioration in market conditions had slowed began to appear in the second quarter of 2009, however, and demand from certain segments of our customer base, including the domestic automotive and construction industries, showed signs of recovery starting in the second quarter of 2009. In response, we began to incrementally increase our crude steel production starting in April 2009 and our production level normalized in the second half of 2009. Prices of our steel products also gradually recovered starting in the third quarter of 2009. However, there can be no assurance that such recovery will continue, and we may decide to adjust our future crude steel production or our sales prices on an on-going basis subject to market demand for our products, the production outlook of the global steel industry and global economic conditions in general. Deterioration of market conditions may result in changes in assumptions underlying the carrying value of certain assets, which in turn could result in impairment of such assets, including intangible assets such as goodwill. We expect fluctuation in demand for our steel products to continue to prevail at least in the near future, which may adversely affect our business, results of operations or financial condition.

 

Korea is our most important market, and our current business and future growth could be materially and adversely affected if economic conditions in Korea deteriorate.

 

We are incorporated in Korea, and a substantial portion of our operations and assets are located in Korea. In addition, Korea is our most important market, accounting for 62.6% of our total sales volume of steel products in 2009. Domestic demand for our products is affected by the condition of major steel consuming industries, such as construction, shipbuilding, automotive, electrical appliances and downstream steel processors, and the Korean economy in general. As a result, we are subject to political, economic, legal and regulatory risks specific to Korea.

 

The economic indicators in Korea in recent years have shown mixed signs, and future growth of the Korean economy is subject to many factors beyond our control. Recent difficulties affecting the U.S. and global financial sectors, adverse conditions and volatility in the worldwide credit and financial markets, fluctuations in oil and commodity prices and the general weakness of the U.S. and global economy have increased the uncertainty of global economic prospects in general and have adversely affected, and may continue to adversely affect, the Korean economy. Due to recent liquidity and credit concerns and volatility in the global financial markets, the value of the Won relative to the Dollar has also fluctuated significantly in recent years. Furthermore, as a result of adverse global and Korean economic conditions, there has been continuing volatility in the stock prices of Korean companies. Any future deterioration of the Korean or global economy could adversely affect our business, financial condition and results of operations.

 

Developments that could have an adverse impact on Korea’s economy in the future include:

 

 

 

We rely on export sales for a significant portion of our total sales. Adverse economic and financial developments in Asia in the future may have an adverse effect on demand for our products in Asia and increase our foreign exchange risks.

 

Our export sales and overseas sales to customers abroad accounted for 37.4% of our total sales volume of steel products in 2009. Our export sales volume to customers in Asia, including China, Japan, Indonesia, Thailand and Malaysia, accounted for 65.8% of our total export sales volume for steel products in 2009, and we expect our sales to these countries, especially to China, to remain important in the future. Accordingly, adverse economic and financial developments in these countries may have an adverse effect on demand for our products. Economic weakness in Asia may also adversely affect our sales to the Korean companies that export to the region, especially companies in the construction, shipbuilding, automotive, electrical appliances and downstream steel processing industries. Weaker demand in these countries, combined with addition of new steel production capacity, particularly in China, may also reduce export prices in Dollar terms of our principal products. We attempt to maintain and expand our export sales to generate foreign currency

receipts to cover our foreign currency purchases and debt service requirements. Consequently, any decrease in our export sales could also increase our foreign exchange risks.

 

Depreciation of the value of the Won against the Dollar and other major foreign currencies may have a material adverse effect on the results of our operations and on the price of the ADSs.

 

The Won has fluctuated significantly against major currencies in recent years. The market average exchange rate, as announced by the Seoul Money Brokerage Services, Ltd., depreciated from Won 938.2 to US$1.00 as of December 31, 2007 to Won 1,573.6 to US$1.00 as of March 3, 2009 but appreciated to W1,167.6 to US$1.00 as of December 31, 2009. The market average exchange rate, as announced by the Seoul Money Brokerage Services, Ltd., was Won 1,188.2 to US$1.00 on June 24, 2010. Depreciation of the Won may materially affect the results of our operations because, among other things, it causes:

 

 

Appreciation of the Won, on the other hand, (i) causes our export products to be less competitive by raising our prices in Dollar terms and (ii) reduces net sales and accounts receivables in Won from export sales, which are primarily denominated in Dollars. However, because of the larger positive effects of the appreciation of the Won (i.e., the reverse of the negative effects caused by the depreciation of the Won, as discussed above), appreciation of the Won generally has a positive impact on our results of operations.

 

Fluctuations in the exchange rate between the Won and the Dollar will also affect the Dollar equivalent of the Won price of the shares of our common stock on the KRX KOSPI Market and, as a result, will likely affect the market price of the ADSs. These fluctuations will also affect the Dollar conversion by the depositary for the ADRs of cash dividends, if any, paid in Won on shares of common stock represented by the ADSs.

 

We are dependent on imported raw materials, and significant increases in market prices of essential raw materials could adversely affect our margins and profits.

 

We purchase substantially all of the principal raw materials we use from sources outside Korea, including iron ore and coal. In 2009, POSCO imported approximately 41.7 million dry metric tons of iron ore and 21.7 million wet metric tons of coal. Iron ore is imported primarily from Australia, Brazil and South Africa. Coal is imported primarily from Australia, Canada and China. Although we have not experienced significant unanticipated supply disruptions in the past, supply disruptions, which could be caused by political or other events in the countries from which we import these materials, could adversely affect our operations.

 

In addition, we are particularly exposed to increases in the prices of coal, iron ore and nickel, which represent the largest components of our cost of goods sold. The prices of our key raw materials have fluctuated significantly in recent years. For example, the average price of coal per wet metric ton (benchmark free on board price of Australian premium hard coking coal) was $98 in 2007, $300 in 2008 and $129 in 2009. The average price of iron ore per dry metric ton (benchmark free on board price of Australian iron ore fines with iron (Fe) 60% content) was $48.30 in 2007, $86.80 in 2008 and

$58.20 in 2009. Future increases in prices of our key raw materials and our inability to pass along such increases to our customers could adversely affect our margins and profits. Increased prices may also cause potential customers to defer purchase of steel products, which would have an adverse effect on our business, financial condition and results of operations.

 

Excess capacity and oversupply in the global steel industry may adversely affect our profitability.

 

In recent years, driven in part by strong growth in steel consumption in the developing world, particularly in China, the global steel industry has experienced renewed interest in expansion of steel production capacity. China is the largest steel producing country in the world by a significant margin, with the balance between its domestic production and demand being an important factor in the determination of global steel prices. In addition, Chinese steel exports may have a significant impact on steel prices in markets outside of China, including Korea.

 

The increased production capacity, combined with a decrease in demand due to the recent slowdown of the global economy, has resulted in production over-capacity in the global steel industry. Production over-capacity in the global steel industry may intensify if the slowdown of the global economy is prolonged or demand from developing countries that have experienced significant growth in the past several years does not meet the recent growth in production capacity. Production over-capacity in the global steel industry is likely to:

 

 

There is no assurance that we will be able to continue to compete successfully in this economic environment or that the prolonged slowdown of the global economy or production over-capacity will not have a material adverse effect on our business, results of operations or financial condition.

 

Disruptions in global credit and financial markets and the resulting governmental actions around the world could have a material adverse impact on our ability to meet our funding needs, and could cause the market value of our securities to decline.

 

In recent years, disruptions and volatility in the global financial markets have resulted in increases in credit spreads and limitations on the availability of credit. Starting in mid-2007, credit markets in the United States began experiencing difficult conditions and increased volatility, which in turn adversely affected worldwide financial markets. Adverse conditions in the global credit and financial markets were further exacerbated in 2008 by the bankruptcy or acquisition of, and government assistance to, several major U.S. and European financial institutions. These developments resulted in reduced liquidity, greater volatility, widening of credit spreads and a reduction in price transparency in the U.S. and global financial markets.

 

In response to such developments, legislators and financial regulators in the United States and other jurisdictions, including Korea, implemented a number of policy measures designed to add stability to the financial markets and stimulate the economy, including the provision of direct and indirect assistance to distressed financial institutions. However, while the rate of deterioration of the global economy slowed in the second half of 2009 and into 2010, with some signs of stabilization and improvement, the overall prospects for the Korean and global economy in 2010 and beyond remain

uncertain. For example, in November 2009, the Dubai government announced a moratorium on the outstanding debt of Dubai World, a government-affiliated investment company. In addition, many governments worldwide, in particular in Greece and other countries in southern Europe, are showing increasing signs of fiscal stress and may experience difficulties in meeting their debt service requirements. Any of these or other developments could potentially trigger another financial and economic crisis. In addition, while many governments worldwide are considering or are in the process of implementing “exit strategies,” in the form of reduced government spending, higher interest rates or otherwise, with respect to the economic stimulus measures adopted in response to the global financial crisis, such strategies may, for reasons related to timing, magnitude or other factors, have the unintended consequence of prolonging or worsening global economic and financial difficulties. Adverse conditions and uncertainty surrounding the Korean and global economies and financial markets may have a material adverse effect on our business and our ability to meet our funding needs, as well as negatively affect the market prices of the ADSs.

 

Consolidation and new market entrants in the global steel industry may increase competition.

 

In recent years, there has been a trend toward industry consolidation among our competitors. For example, consolidation of Mittal and Arcelor in 2006 has created a company with approximately 10% of global steel production capacity. Competition from global steel manufacturers with expanded production capacity such as ArcelorMittal and new market entrants, especially from China and India, have resulted in significant price competition and may result in declining margins and reductions in revenue. Our larger competitors may use their resources, which may be greater than ours, against us in a variety of ways, including by making additional acquisitions, investing more aggressively in product development and capacity and displacing demand for our export products.

 

Competition from steel substitute materials may reduce demand for steel products.

 

Steel competes with other natural and synthetic materials that may be used as steel substitutes, such as aluminum, cement, composites, glass, plastic and wood. Government regulatory initiatives mandating the use of such materials instead of steel, whether for environmental or other reasons, as well as the development of attractive alternative substitutes for steel products, may reduce demand for steel products and adversely affect our business, results of operations or financial condition.

 

Expansion of our production operations abroad is important to our long-term success, and our limited experience in the operation of our business outside Korea increases the risk that our international expansion efforts will not be successful.

 

We conduct international trading and construction operations abroad, and our business relies on a global trading network comprised of overseas subsidiaries, branches and representative offices. Although many of our subsidiaries and overseas branches are located in developed countries, we also operate in numerous countries with developing economies. In addition, we intend to continue to expand our production operations internationally by carefully seeking out promising investment opportunities, particularly in China, India and Southeast Asia, in part to prepare for the eventual maturation of the Korean steel market. We may enter into joint ventures with foreign steel producers that would enable us to rely on these businesses to conduct our operations, establish local networks and coordinate our sales and marketing efforts abroad. To the extent that we enter into these arrangements, our success will depend in part on the willingness of our partner companies to dedicate sufficient resources to their partnership with us.

 

In other situations, we may decide to establish manufacturing facilities by ourselves instead of relying on partners. The demand and market acceptance for our products produced abroad are subject to a high level of uncertainty and are substantially dependent upon the market condition of the

global steel industry. We cannot assure you that our international expansion plan will be profitable or that we can recoup the costs related to such investments.

 

Expansion of our trading, construction and production operations abroad requires management attention and resources. In addition, we face additional risks associated with our expansion outside Korea, including:

 

 

We may from time to time engage in acquisitions for which we may be required to seek additional sources of capital.

 

From time to time, we may selectively acquire or invest in companies or businesses that may complement our business. In order to finance these acquisitions, we intend to use cash on hand, funds from operations, issuances of equity and debt securities, and, if necessary, financings from banks and other sources as well as entering into consortiums with financial investors. However, no assurance can be given that we will obtain sufficient financing for such acquisitions or investments on terms commercially acceptable to us or at all. We also cannot assure you that such financings and related debt payment obligations will not have a material adverse impact on our financial condition, results of operations or cash flow.

 

Several of our products have been and may become subject to anti-dumping or countervailing proceedings, which may have an adverse effect on our export sales.

 

In recent years, several of our products have been subject to anti-dumping or countervailing proceedings, including in the United States, the European Union and China. Further increases in or new imposition of anti-dumping duties, countervailing duties, quotas or tariffs on our sales in these markets may have a material adverse effect on our exports to these regions in the future. Our export sales and overseas sales to customers in the United States, Europe and China accounted for 16.5% of our total sales volume of steel products in 2009. See “Item 4. Information on the Company — Item 4.B. Business Overview — Markets — Exports.”

 

Cyclical fluctuations based on macroeconomic factors may adversely affect POSCO E&C’s business and performance.

 

In order to complement our steel operations, we engage in engineering and construction activities through POSCO Engineering & Construction Co., Ltd. (“POSCO E&C”), an 89.5%-owned subsidiary. The engineering and construction segment, which accounted for approximately 10.6% of our consolidated sales in 2009, is highly cyclical and tends to fluctuate based on macroeconomic factors, such as consumer confidence and income, employment levels, interest rates, inflation rates, demographic trends and policies of the Government. Although we believe that POSCO E&C’s strategy of focusing on high-value-added plant construction and urban planning and development projects

such as Songdo New City has enabled it to be exposed to a lesser degree to general economic conditions in Korea in comparison to some of its domestic competitors, our construction revenues have fluctuated in the past depending on the level of domestic construction activity including new construction orders. POSCO E&C’s construction operations could suffer in the future in the event of a general downturn in the construction market resulting in weaker demand, which could adversely affect POSCO E&C’s business, results of operations or financial condition.

 

Many of POSCO E&C’s domestic and overseas construction projects are on a fixed-price basis, which could result in losses for us in the event that unforeseen additional expenses arise with respect to the project.

 

Many of POSCO E&C’s domestic and overseas construction projects are carried out on a fixed-price basis according to a predetermined timetable, pursuant to the terms of a fixed-price contract. Under such fixed-price contracts, POSCO E&C retains all cost savings on completed contracts but is also liable for the full amount of all cost overruns and may be required to pay damages for late delivery. The pricing of fixed-price contracts is crucial to POSCO E&C’s profitability, as is its ability to quantify risks to be borne by it and to provide for contingencies in the contract accordingly.

 

POSCO E&C attempts to anticipate increases in costs of labor, raw materials and parts and components in its bids on fixed-price contracts. However, the costs incurred and gross profits realized on a fixed-price contract may vary from its estimates due to factors such as:

 

 

If unforeseen additional expenses arise over the course of a construction project, such expenses are usually borne by POSCO E&C, and its profit from the project will be correspondingly reduced or eliminated. If POSCO E&C experiences significant unforeseen additional expenses with respect to its fixed price projects, it may incur losses on such projects, which could have a material adverse effect on its financial condition and results of operations.

 

POSCO E&C’s domestic residential property business is highly dependent on the real estate market in Korea.

 

The performance of POSCO E&C’s domestic residential property business is highly dependent on the general condition of the real estate market in Korea. The construction industry in Korea is experiencing a downturn, due to excessive investment in recent years in residential property development projects, stagnation of real property prices and reduced demand for residential property, especially in areas outside of Seoul, including as a result of deteriorating conditions in the Korean economy. In addition, as liquidity and credit concerns and volatility in the global financial markets increased significantly starting in September 2008, there has been a general decline in the willingness by banks and other financial institutions in Korea to engage in project financing and other lending activities to construction companies, which may adversely impact POSCO E&C’s ability to meet its desired funding needs. The Government has taken measures to support the Korean construction industry, including easing of regulations imposed on redevelopment of apartment buildings and resale restrictions in the metropolitan areas, as well as reductions in property taxes. While the Korean real estate market has steadily recovered since the second half of 2009, there can be no assurance that declines in demand or prices will not take place in the Korean real estate market in the future or that a slowdown of the Korean real estate market will not have a material adverse effect on POSCO E&C’s business, results of operations or financial condition.

We may not be able to successfully execute our diversification strategy.

 

In part to prepare for the eventual maturation of the Korean steel market, our overall strategy includes securing new growth engines by diversifying into new businesses related to our steel operations that we believe will offer greater potential returns, such as liquefied natural gas production, logistics and magnesium coil and sheet production, as well as entering into new businesses not related to our steel operations such as power generation, development of alternative energy and advanced materials, information and technology related consulting services and wireless broadband Internet access service.

 

From time to time, we may selectively acquire or invest in companies to pursue such diversification strategy. For example, in May 2010, we were selected as the preferred bidder for a 68% interest in Daewoo International Corporation, a global trading company that primarily engages in trading of steel and raw materials as well as investing in energy development projects. Daewoo International had total revenues of Won 11,544 billion in 2009, total net income of Won 131 billion in 2009 and total assets of Won 4,695 billion as of December 31, 2009. Daewoo International Corporation has invested in a portfolio of energy exploration and production projects, including oil and gas projects located in Peru, Oman, Vietnam, Myanmar, Uzbekistan and Russia, as well as mineral projects located in Australia, Bolivia and Madagascar. Daewoo International Corporation also holds a 24% interest in Kyobo Life Insurance, Korea’s third largest life insurance company in terms of market share. Our final decision to purchase the controlling interest is subject to satisfactory completion of additional due diligence of the company.

 

Our ability to implement our overall diversification strategy will depend on a variety of factors, some of which are beyond our control, including the availability of qualified engineers and personnel, establishment of new relationships and expansion of existing relationships with various customers and suppliers, procurement of necessary technology and know-how to engage in such businesses and access to investment capital at reasonable costs. No assurance can be given that our diversification strategy can be completed profitably.

 

We are subject to environmental regulations, and our operations could expose us to substantial liabilities.

 

We are subject to national and local environmental laws and regulations, including increasing pressure to reduce emission of carbon dioxide relating to our manufacturing process, and our steel manufacturing and construction operations could expose us to risk of substantial liability relating to environmental or health and safety issues, such as those resulting from discharge of pollutants and carbon dioxide into the environment, the handling, storage and disposal of solid or hazardous materials or wastes and the investigation and remediation of contaminated sites. We may be responsible for the investigation and remediation of environmental conditions at currently and formerly operated manufacturing or construction sites. We may also be subject to associated liabilities, including liabilities for natural resource damage, third party property damage or personal injury resulting from lawsuits brought by the government or private litigants. In the course of our operations, hazardous wastes may be generated at third party-owned or operated sites, and hazardous wastes may be disposed of or treated at third party-owned or operated disposal sites. If those sites become contaminated, we could also be held responsible for the cost of investigation and remediation of such sites, for any associated natural resource damage, and for civil or criminal fines or penalties.

 

Failure to protect our intellectual property rights could impair our competitiveness and harm our business and future prospects.

 

We believe that developing new steel manufacturing technologies that can be differentiated from those of our competitors, such as FINEX, strip casting and silicon steel manufacturing technologies, is critical to the success of our business. We take active measures to obtain protection of our intellectual property by obtaining patents and undertaking monitoring activities in our major

markets. However, we cannot assure you that the measures we are taking will effectively deter competitors from improper use of our proprietary technologies. Our competitors may misappropriate our intellectual property, disputes as to ownership of intellectual property may arise and our intellectual property may otherwise become known or independently developed by our competitors. Any failure to protect our intellectual property could impair our competitiveness and harm our business and future prospects.

 

We rely on trade secrets and other unpatented proprietary know-how to maintain our competitive position, and unauthorized disclosure of our trade secrets or other unpatented proprietary know-how could negatively affect our business.

 

We rely on trade secrets and unpatented proprietary know-how and information. We enter into confidentiality agreements with each of our employees and consultants upon the commencement of an employment or consulting relationship. These agreements generally provide that all inventions, ideas, discoveries, improvements and patentable material made or conceived by the individual arising out of the employment or consulting relationship and all confidential information developed or made known to the individual during the term of the relationship is our exclusive property. We cannot assure the enforceability of these types of agreements, or that they will not be breached. We also cannot be certain that we will have adequate remedies for any breach. The disclosure of our trade secrets or other know-how as a result of such a breach could adversely affect our business.

 

Escalations in tension with North Korea could have an adverse effect on us and the market value of our securities.

 

Relations between Korea and North Korea have been tense throughout Korea’s modern history. The level of tension between the two Koreas has fluctuated and may increase abruptly as a result of current and future events. In recent years, there have been heightened security concerns stemming from North Korea’s nuclear weapons and long-range missile programs and increased uncertainty regarding North Korea’s actions and possible responses from the international community.

 

In addition to conducting test flights of long-range missiles, North Korea announced in October 2006 that it had successfully conducted a nuclear test, which increased tensions in the region and elicited strong objections worldwide. In response, the United Nations Security Council passed a resolution that prohibits any United Nations member state from conducting transactions with North Korea in connection with any large-scale arms and material or technology related to missile development or weapons of mass destruction and from providing luxury goods to North Korea, imposes an asset freeze and travel ban on persons associated with North Korea’s weapons program, and calls upon all United Nations member states to take cooperative action, including through inspection of cargo to or from North Korea. In response, North Korea agreed in February 2007 at the six-party multi-lateral talks with Korea, the United States, China, Japan and Russia to shut down and seal the Yongbyon nuclear facility, including the reprocessing facility, and readmit international inspectors to conduct all necessary monitoring and verifications.

 

In April 2009, North Korea launched a long-range rocket over the Pacific Ocean. Korea, Japan and the United States responded that the launch poses a threat to neighboring nations and that it was in violation of the United Nations Security Council resolution adopted in 2006 against nuclear tests by North Korea, and the United Nations Security Council unanimously passed a resolution that condemned North Korea for the launch and decided to tighten sanctions against North Korea. Subsequently, North Korea announced that it would permanently pull out of the six party talks and restart its nuclear program, and the International Atomic Energy Agency reported that its inspectors had been ordered to remove surveillance devices and other equipment at the Yongbyon nuclear power plant and to leave North Korea. On May 25, 2009, North Korea announced that it had successfully conducted a second nuclear test and test-fired three short-range surface-to-air missiles. In response, the United Nations Security Council unanimously passed a resolution that condemned North Korea for the nuclear test and decided to expand and tighten sanctions against North Korea.

In addition, there recently has been increased uncertainty with respect to the future of North Korea’s political leadership and concern regarding its implications for economic and political stability in the region. In June 2009, U.S. and Korean officials announced that Kim Jong-il, the North Korean ruler who reportedly suffered a stroke in August 2008, designated his third son, who is reportedly in his twenties, to become his successor. The succession plan, however, remains uncertain. In addition, North Korea’s economy faces severe challenges. For example, in November 2009, the North Korean government redenominated its currency at a ratio of 100 to 1 as part of a currency reform undertaken in an attempt to control inflation and reduce income gaps. Such developments may further aggravate social and political tensions within North Korea. In March 2010, a Korean warship was destroyed by an underwater explosion, killing many of the crewmen on board. In May 2010, the Government formally accused North Korea of causing the sinking and is seeking United Nations Security Council sanctions for the act. North Korea has threatened retaliation for any attempt to punish it for the act.

 

There can be no assurance that the level of tension on the Korean peninsula will not escalate in the future. Any further increase in tension, which may occur, for example, if North Korea experiences a leadership or economic crisis, high-level contacts break down, or military hostilities occur, could have a material adverse effect on our operations and the market value of the ADSs.

 

If you surrender your ADRs to withdraw shares of our common stock, you may not be allowed to deposit the shares again to obtain ADRs.

 

Under the deposit agreement, holders of shares of our common stock may deposit those shares with the ADR depositary’s custodian in Korea and obtain ADRs, and holders of ADRs may surrender ADRs to the ADR depositary and receive shares of our common stock. However, under current Korean laws and regulations, the depositary bank is required to obtain our prior consent for the number of shares to be deposited in any given proposed deposit that exceeds the difference between (i) the aggregate number of shares deposited by us for the issuance of ADSs (including deposits in connection with the initial and all subsequent offerings of ADSs and stock dividends or other distributions related to these ADSs) and (ii) the number of shares on deposit with the depositary bank at the time of such proposed deposit. It is possible that we may not give the consent. As a result, if you surrender ADRs and withdraw shares of common stock, you may not be able to deposit the shares again to obtain ADRs. See “Item 10. Additional Information — Item 10.D. Exchange Controls.”

 

You may not be able to exercise preemptive rights for additional shares of common stock and may suffer dilution of your equity interest in us.

 

The Commercial Code and our articles of incorporation require us, with some exceptions, to offer shareholders the right to subscribe for new shares in proportion to their existing ownership percentage whenever new shares are issued. If we issue new shares to persons other than our shareholders (See “Item 10.B. Memorandum and Articles of Association — Preemptive Rights and Issuance of Additional Shares”), a holder of our ADSs will experience dilution of such holding. If none of these exceptions is available, we will be required to grant preemptive rights when issuing additional common shares under Korean law. Under the deposit agreement governing the ADSs, if we offer any rights to subscribe for additional shares of our common stock or any rights of any other nature, the ADR depositary, after consultation with us, may make the rights available to you or use reasonable efforts to dispose of the rights on your behalf and make the net proceeds available to you. The ADR depositary, however, is not required to make available to you any rights to purchase any additional shares unless it deems that doing so is lawful and feasible and:

 

 

 

We are under no obligation to file any registration statement under the Securities Act to enable you to exercise preemptive rights in respect of the common shares underlying the ADSs, and we cannot assure you that any registration statement would be filed or that an exemption from the registration requirement under the Securities Act would be available. Accordingly, if a registration statement is required for you to exercise preemptive rights but is not filed by us, you will not be able to exercise your preemptive rights for additional shares and may suffer dilution of your equity interest in us.

 

U.S. investors may have difficulty enforcing civil liabilities against us and our directors and senior management.

 

We are incorporated in Korea with our principal executive offices located in Seoul. The majority of our directors and senior management are residents of jurisdictions outside the United States, and the majority of our assets and the assets of such persons are located outside the United States. As a result, U.S. investors may find it difficult to effect service of process within the United States upon us or such persons or to enforce outside the United States judgments obtained against us or such persons in U.S. courts, including actions predicated upon the civil liability provisions of the U.S. federal securities laws. It may also be difficult for an investor to enforce in U.S. courts judgments obtained against us or such persons in courts in jurisdictions outside the United States, including actions predicated upon the civil liability provisions of the U.S. federal securities laws. It may also be difficult for a U.S. investor to bring an action in a Korean court predicated upon the civil liability provisions of the U.S. federal securities laws against our directors and senior management and non-U.S. experts named in this annual report.

 

This annual report contains “forward-looking statements” that are subject to various risks and uncertainties.

 

This annual report contains “forward-looking statements” that are based on our current expectations, assumptions, estimates and projections about our company and our industry. The forward-looking statements are subject to various risks and uncertainties. Generally, these forward-looking statements can be identified by the use of forward-looking terminology such as “anticipate,” “believe,” “estimate,” “expect,” “intend,” “project,” “should,” and similar expressions. Those statements include, among other things, the discussions of our business strategy and expectations concerning our market position, future operations, margins, profitability, liquidity and capital resources. We caution you that reliance on any forward-looking statement involves risks and uncertainties, and that although we believe that the assumptions on which our forward-looking statements are based are reasonable, any of those assumptions could prove to be inaccurate, and, as a result, the forward-looking statements based on those assumptions could be incorrect. The uncertainties in this regard include, but are not limited to, those identified in the risk factors discussed above. In light of these and other uncertainties, you should not conclude that we will necessarily achieve any plans and objectives or projected financial results referred to in any of the forward-looking statements. We do not undertake to release the results of any revisions of these forward-looking statements to reflect future events or circumstances.

 

 

 

We were established by the Government on April 1, 1968, under the Commercial Code, to manufacture and distribute steel rolled products and plates in the domestic and overseas markets. The Government owned more than 70% of our equity until 1988, when the Government reduced its ownership of our common stock to 35% through a public offering and listing our shares on the KRX

KOSPI Market. In December 1998, the Government sold all of our common stock it owned directly, and The Korea Development Bank completed the sale of our shares that it owned in September 2000. The Government no longer holds any direct interest in us, and our outstanding common stock is currently held by individuals and institutions. See “Item 7. Major Shareholders and Related Party Transactions — Item 7A. Major Stockholders.”

 

Our legal and commercial name is POSCO. Our principal executive offices are located at POSCO Center, 892 Daechi-4-dong, Gangnam-gu, Seoul, Korea, and our telephone number is (822) 3457-0975.

 

 

The Company

 

We are the largest fully integrated steel producer in Korea, and one of the largest steel producers in the world, based on annual crude steel production in 2009. We produced approximately 31.7 million tons of crude steel in 2009, a substantial portion of which was produced at Pohang Works and Gwangyang Works. Currently, Pohang Works has an annual crude steel and stainless steel production capacity of 15.0 million tons, and Gwangyang Works has an annual crude steel production capacity of 18.0 million tons. We believe Pohang Works and Gwangyang Works are two of the most technologically advanced integrated steel facilities in the world. We manufacture and sell a diversified line of steel products, including hot rolled and cold rolled products, plates, wire rods, silicon steel sheets and stainless steel products, and we are able to meet a broad range of customer needs from manufacturing industries that consume steel, including automotive, shipbuilding, home appliance, engineering and machinery industries.

 

We sell primarily to the Korean market, with domestic sales accounting for 62.6% of our total sales volume of steel products in 2009. We believe that we had an overall market share of approximately 42.8% of the total sales volume of steel products sold in Korea in 2009. Our export sales and overseas sales to customers abroad in 2008 and 2009 accounted for 31.7% and 37.4% of our total sales volume of steel products, respectively. Our major export market is Asia, with China accounting for 33.8%, Japan 10.9% and the rest of Asia 21.1% of our total steel export sales volume in 2009.

 

Business Strategy

 

Leveraging on our success during the past four decades, our goal is to strengthen our position as one of the leading steel producers in the world and strive to rank among the top three global steel companies in technology leadership, operational excellence and production capacity. In recent years, the global steel industry has undergone significant consolidation, resulting in the emergence of steel companies with expanded production capacity. We seek to achieve continued global excellence in this era of consolidation through a renewed emphasis on growth and innovation. Over the next decade, we seek to expand our position as a global company by adding significant production bases outside Korea. We also intend to secure growth by further solidifying our market position in the steel sector, while allocating additional resources into businesses that we believe will offer us greater potential returns and serve as our new growth engines, such as the engineering and construction, energy and information and technology businesses.

 

We seek to strengthen our competitiveness and pursue growth through the following core business strategies:

 

Continue to Seek Growth Opportunities in the Steel Sector

 

We carefully seek out promising investment opportunities abroad, primarily in China, India, Southeast Asia and Mexico, in part to prepare for the eventual maturation of the Korean steel market. We believe that China, India, Southeast Asia and Mexico will continue to offer substantial growth

opportunities, and we plan to selectively seek investment opportunities and expand our production base in these countries.

 

For example, we are in the process of obtaining regulatory approvals from the Indian Government for the construction of an integrated steel mill and the development of iron ore mines in Orissa State. In Vietnam, we completed the construction of a plant in September 2009 with an annual production capacity of 1.2 million tons of cold rolled products and commenced commercial production in October 2009. In Mexico, we completed the construction of a plant in August 2009 with an annual production capacity of 0.4 million tons of cold rolled products and commenced commercial production in June 2009 to produce automotive steel sheets to supply automotive manufacturers in Mexico, Southeastern United States and South America.

 

We are also building a global distribution network of supply chain management centers to provide processing and logistics services and more effectively respond to changes in consumer trends in the global steel market. In 2009, we operated 42 supply chain management centers worldwide that recorded aggregate sales of 2.6 million tons of steel products. We plan to continue expanding our global network of supply chain management centers. In Korea, we plan to continue to expand our production facilities and upgrade our facilities that utilize advanced manufacturing technologies, and we plan to enhance the quality of our products through continued modernization and rationalization of our facilities.

 

Maintain Technology Leadership

 

As part of our strategy, we have identified core products that we plan to further develop, such as premium automotive steel sheets, silicon steel and API-grade steel, and we will continue to invest in developing innovative products that offer the greatest potential returns and enhance the overall quality of our products. In order to increase our competitiveness, we plan to make additional investments in the development of new manufacturing technologies, such as FINEX, strip casting, endless rolling and environment-friendly manufacturing processes. We will continue to refine FINEX, a low cost, environmentally friendly steel manufacturing process that optimizes our production capacity by utilizing non-agglomerated iron ore fines and using non-coking coal as an energy source and a reducing agent. We believe that FINEX offers considerable environmental and economic advantages through elimination of major sources of pollution such as sintering and coking plants, as well as reducing operating and raw material costs. We also plan to accelerate development of other advanced technologies, such as strip casting that directly casts coils from liquid steel and a rolling process that rolls hot rolled coils up to 40 slabs at a time. We plan to further devote additional resources into our research and development efforts and increase the proportion of our sales of higher margin, higher value-added products.

 

Pursue Cost-Cutting through Operational and Process Innovations

 

We seek to achieve cost reductions in this era of increasing raw material costs through our company-wide process for innovation and enhancing efficiency of operations. We believe that strategic cost cutting measures through utilization of efficient production methods and management discipline will strengthen our corporate competitiveness. After implementation of Six Sigma innovations in recent years, we are now implementing the Quick Six Sigma program, a customized program that we believe will enhance our corporate culture that rewards innovative ideas at all stages of our operations and enable us to benchmark successful innovations to all relevant processes within the company. We will also strive to invest more in human resources development to nurture employees who are capable of working in the global environment.

 

Secure Procurement of Raw Materials through Strategic Investments

 

We purchase substantially all of the principal raw materials we use, including iron ore, coal and nickel, from sources outside Korea. Import prices of many of the principal raw materials, including iron

ore and nickel, have fluctuated substantially in recent years. To secure adequate procurement of principal raw materials, we have invested and will continue to explore additional investment opportunities in various raw material development projects abroad, as well as enter into long-term contracts with leading suppliers of raw materials, principally in Australia and Brazil.

 

Selectively Seek Opportunities in Growth Industries

 

We will continue to selectively seek opportunities in growth industries to diversify our business both vertically and horizontally. New businesses not related to our steel operations in which we intend to focus our diversification include power generation, alternative energy development and information and technology.

 

POSCO Power Corporation, our wholly-owned subsidiary that is the largest private power generation company in Korea, completed construction of a fuel cell manufacturing plant with an annual production capacity of 50 megawatts in Pohang in 2008 with the objective of enhancing the company’s ability to meet the growing demands for clean and renewable energy. Through POSCO ICT Co., Ltd., a 61.9%-owned subsidiary, we also engage in information and technology consulting services as well as automation and system integration engineering services. POSCO E&C, our consolidated subsidiary in which we hold an 89.5% interest, is one of the leading engineering and construction companies in Korea that primarily engages in the planning, design and construction of industrial plants and architectural works and civil engineering.

 

In May 2010, we were also selected as the preferred bidder for a 68% interest in Daewoo International Corporation, a global trading company that primarily engages in trading of steel and raw materials as well as investing in energy development projects. Daewoo International had total revenues of Won 11,544 billion in 2009, total net income of Won 131 billion in 2009 and total assets of Won 4,695 billion as of December 31, 2009. Daewoo International Corporation has invested in a portfolio of energy exploration and production projects, including oil and gas projects located in Peru, Oman, Vietnam, Myanmar, Uzbekistan and Russia, as well as mineral projects located in Australia, Bolivia and Madagascar. Daewoo International Corporation also holds a 24% interest in Kyobo Life Insurance, Korea’s third largest life insurance company in terms of market share. Our final decision to purchase the controlling interest is subject to satisfactory completion of additional due diligence of the company.

 

We will continue to selectively seek opportunities to identify new growth engines and diversify our operations.

 

Major Products

 

We manufacture and sell a broad line of steel products, including the following:

 

 

The tables below set out our sales revenues and sales volume by major steel product categories for the periods indicated.

 

 

 

The sales revenues and sales volumes in the tables above represent the steel product sales of our consolidated entities which are steel-related companies but do not include the non-steel product sales of these entities. They include sales by our consolidated sales subsidiaries of steel products purchased by these subsidiaries from third parties, including trading companies to which we sell steel products. The sales of steel products purchased from third parties amounted to approximately 1.0 million tons in 2005, 0.8 million tons in 2006, 1.0 million tons in 2007, 0.9 million tons in 2008 and 0.5 million tons in 2009, accounting for Won 807 billion in 2005, Won 470 billion in 2006, Won 623 billion in 2007, Won 799 billion in 2008 and Won 396 billion in 2009, respectively.

 

Hot Rolled Products

 

Hot rolled coils and sheets have many different industrial applications. They are used to manufacture structural steel used in the construction of buildings, industrial pipes and tanks, and automobile chassis. Hot rolled coil is also manufactured in a wide range of widths and thickness as the feedstock for higher value-added products such as cold rolled products and silicon steel sheets.

 

Our deliveries of hot rolled products amounted to 8.0 million tons in 2009, representing 25.8% of our total sales volume of steel products. The Korean market accounted for 5.2 million tons or 65.3% of our hot rolled product sales in 2009, representing a domestic market share of approximately 40%. The largest customers of our hot rolled products are downstream steelmakers in Korea who use the products to manufacture pipes and cold rolled products.

 

Hot rolled products constitute one of our two largest product categories in terms of sales volume and the third largest product category in terms of revenue. In 2009, our sales volume of hot rolled products decreased by 7.8% compared to 2008 primarily due to a decrease in demand from downstream steelmakers in Korea.

Plates

 

Plates are used in shipbuilding, structural steelwork, offshore oil and gas production, power generation, mining, and the manufacture of earth-moving and mechanical handling equipment, boiler and pressure vessels and other industrial machinery.

 

Our deliveries of plates amounted to 4.6 million tons in 2009, representing 14.7% of our total sales volume of steel products. The Korean market accounted for 4.2 million tons or 91.2% of our plate sales in 2009, representing a domestic market share of approximately 35%. The Korean shipbuilding industry, which uses plates to manufacture chemical tankers, rigs, bulk carriers and containers, and the construction industry are our largest customers of plates.

 

In 2009, our sales volume of plates decreased by 6.1% compared to 2008 primarily due to a decrease in demand from the shipbuilding industry. Although new orders for vessels decreased significantly since the global economic downturn, demand from the shipbuilding industry remained relatively stable in 2009 due to the industry’s backlog of shipbuilding orders.

 

Wire Rods

 

Wire rods are used mainly by manufacturers of wire, fasteners, nails, bolts, nuts and welding rods. Wire rods are also used in the manufacture of coil springs, tension bars and tire cords in the automotive industry.

 

Our deliveries of wire rods amounted to 2.4 million tons in 2009, representing 7.8% of our total sales volume of steel products. The Korean market accounted for 1.7 million tons or 69.7% of our wire rod sales in 2009, representing a domestic market share of approximately 60%. The largest customers for our wire rods are manufacturers of wire ropes and fasteners.

 

In 2009, our sales volume of wire rods decreased by 4.4% compared to 2008 primarily due to a decrease in demand from the automotive industry.

 

Cold Rolled Products

 

Cold rolled coils and further refined galvanized cold rolled products are used mainly in the automotive industry to produce car body panels. Other users include the household goods, electrical appliances, engineering and metal goods industries.

 

Our deliveries of cold rolled products amounted to 11.2 million tons in 2009, representing 36.2% of our total sales volume of steel products. The Korean market accounted for 5.9 million tons or 52.4% of our cold rolled product sales in 2009, representing a domestic market share of approximately 55%.

 

Cold rolled products constitute our largest product category in terms of sales volume and revenue. Prior to the global economic downturn, sales of cold rolled products experienced growth due to an increase in demand from the automotive industry. However, our sales volume of cold rolled products in 2009 decreased by 11.7% compared to our sales volume in 2008 primarily due to a decrease in demand from the automotive industry in the first quarter of 2009, which subsequently showed recovery starting in the second quarter of 2009.

 

Silicon Steel Sheets

 

Silicon steel sheets are used mainly in the manufacture of power transformers and generators and rotating machines.

 

Our deliveries of silicon steel sheets amounted to 915 thousand tons in 2009, representing 2.9% of our total sales volume of steel products. The Korean market accounted for 338 thousand tons or 36.9% of our silicon steel sheet sales in 2009, representing a domestic market share of approximately 95%.

In 2009, our sales volume of silicon steel sheets decreased by 12.8% compared to 2008 due to a decrease in demand from manufacturers of power transformers and generators.

 

Stainless Steel Products

 

Stainless steel products are used to manufacture household goods and are also used by the chemical industry, paper mills, the aviation industry, the automotive industry, the construction industry and the food processing industry.

 

Our deliveries of stainless steel products amounted to 2.3 million tons in 2009, representing 7.3% of our total sales volume of steel products. The Korean market accounted for 0.8 million tons or 34.5% of our stainless steel product sales in 2009, representing a domestic market share of approximately 60%.

 

Stainless steel products constitute our second largest product category in terms of revenue. Although sales of stainless steel products accounted for only 7.3% of our total sales volume in 2009, they represented 19.6% of our total revenues from sales of steel products in 2009. Our sales volume of stainless steel products increased by 10.7% in 2009 compared to 2008 due to an increase in demand from the automotive industry and the household goods industry.

 

Others

 

Other products include lower value-added semi-finished products such as pig iron, billets, blooms and slab.

 

Markets

 

Korea is our most important market. Domestic sales represented 62.6% of our total sales volume of steel products in 2009. Our export sales and overseas sales to customers abroad represented 37.4% of our total sales volume of steel products in 2009. Our sales strategy has been to devote our production primarily to satisfy domestic demand, while seeking export sales to utilize capacity to the fullest extent and to expand our international market presence.

 

Domestic Market

 

The total Korean market for steel products amounted to 45.4 million tons in 2009. We sold a total of 19.4 million tons of steel products in Korea in 2009, maintaining an overall domestic market share of approximately 42.8% for such period.

 

The table below sets out sales of steel products in Korea for the periods indicated.

 

 

 

 

Total sales volume of steel products in Korea increased by 5.3% in 2006, 11.0% in 2007 and 6.3% in 2008 primarily due to an increase in demand from the shipbuilding and automotive industries during such period, but decreased by 22.5% in 2009 in response to sluggish demand from customers in the industries adversely impacted by deteriorating global economic conditions, such as the automotive and construction industries.

From 2005 to 2008, our domestic sales volume decreased from 22.9 million tons in 2005 to 21.0 million tons in 2006 but increased to 22.9 million tons in 2008, in part due to our efforts to increase export sales volume from 2005 to 2006 due to more favorable prices overseas as well as an increase in demand from overseas for our high value added products during such periods. In 2009, our domestic sales volume decreased to 19.4 million tons principally due to the weak demand for steel products in certain key industries such as the automotive and construction industries. Our market share decreased from 48.5% in 2005 to 38.6% in 2007 before rebounding to 39.1% in 2008 and further increasing to 42.8% in 2009.

 

Domestic sales volume of other Korean steel companies, such as Hyundai Steel Co., Ltd. and Dongbu Steel Co., Ltd., increased from 16.0 million tons in 2005 to 21.2 million tons in 2007 primarily due to an increase in their production capacity, and the aggregate market share of other Korean steel companies increased from 33.9% in 2005 to 38.5% in 2007. In 2008, in part due to our decision to sell a greater portion of our sales volume to consumers in Korea due to more favorable domestic prices, domestic sales volume of other Korean steel producers decreased by 2.7% to 20.7 million tons and their aggregate market share decreased to 35.3%. In 2009, domestic sales volume of other Korean steel producers further decreased by 18.0% to 16.9 million tons in 2009 as the general demand for steel products decreased in response to the economic downturn in Korea in the first half of 2009.

 

In recent years, domestic consumers of steel products have also relied on imports from foreign competitors, primarily from China and Japan. Import volume of steel products steadily increased from 8.3 million tons in 2005 to 15.0 million tons in 2008, resulting in an increase in their aggregate domestic market share from 17.6% in 2005 to 25.6% in 2008. However, due to the global economic downturn, import volume of steel products decreased by 39.8% to 9.0 million tons of steel products in 2009, resulting in a decrease in market share to 19.9%.

 

We sell in Korea higher value-added and other finished products to end-users and semi-finished products to other steel manufacturers for further processing. Local distribution companies and sales affiliates sell finished steel products to low-volume customers. We provide service technicians for large customers and distributors in each important product area.

 

Exports

 

Our export sales and overseas sales to customers abroad represented 37.4% of our total sales volume of steel products in 2009, 65.8% of which was generated from exports sales and overseas sales to customers in Asian countries. Our export sales and overseas sales to customers abroad in terms of sales volume increased by 9.4% to 11.6 million tons in 2009. In response to weak domestic demand for steel products in the first half of 2009, we strategically focused on increasing our sales to customers abroad in 2009. The tables below set out our export sales and overseas sales to customers abroad in terms of sales volume of steel products by geographical market and by product for the periods indicated.

 

 

 

The table below sets out our total sales, including non-steel sales, by geographical location of customers for the periods indicated.

 

 

The above tables include sales by our consolidated sales subsidiaries of steel products purchased by these subsidiaries from third parties, including trading companies to which we sell steel products.

 

The table below sets out the world’s apparent crude steel use for the periods indicated.

 

 

 

Source: World Steel Association.

 

Recent difficulties affecting the U.S. and global financial sectors, adverse conditions and volatility in the U.S. and worldwide credit and financial markets, fluctuations in oil and commodity prices and the general weakness of the U.S. and global economies have increased the uncertainty of global economic prospects in general and have adversely affected the global and Korean economies. Such developments have weakened global demand in steel consumption. The World Steel Association forecasts that global apparent crude steel use is expected to increase by 10.7% to 1,241 million metric tons in 2010 after declining by 6.3% (1,121 million metric tons) in 2009.

 

In recent years, driven in part by strong growth in steel consumption in China, the global steel industry has experienced renewed interest in expansion of steel production capacity. World Steel Dynamics estimated the global crude steel production capacity to increase from 1,483 million tons in 2008 to 1,543 million tons in 2009 and expects the production capacity to increase slightly in 2010. The increased production capacity, combined with weakening demand due primarily to the recent slowdown of the global economy, has resulted in production over-capacity in the global steel industry. Production over-capacity in the global steel industry may intensify if the slowdown of the global

economy is prolonged or demand from developing countries that have experienced significant growth in the past several years does not meet the recent growth in production capacity.

 

We distribute our export products mostly through Korean trading companies and our overseas sales subsidiaries. Our largest export market in 2009 was China, which accounted for 33.8% of our export volume of steel products, including sales by our overseas subsidiaries. The principal products exported to China are cold rolled products and stainless steel products. Our exports to China amounted to 3.2 million tons in 2007, 2.6 million tons in 2008 and 3.9 million tons in 2009. Our sales volume to China decreased by 19.9% in 2008 due to weak market conditions in the second half of 2008. Our exports to China rebounded and increased by 54.0% in 2009 primarily due to a strong increase in demand from Chinese customers in 2009. Our exports to Japan increased from 2.0 million tons in 2006 to 2.1 million tons in 2007 primarily due to a general increase in the Japanese market price of our products. Sales volume to Japan decreased by 8.6% to 2.0 million tons in 2008 and further decreased by 35.2% to 1.3 million tons in 2009 as we elected to focus our sales efforts in China and other markets with greater growth opportunities. Sales volume to Asian countries other than China and Japan increased from 2.1 million tons in 2007 to 2.3 million tons in 2008 and further increased to 2.4 million tons in 2009 primarily due to our decision to export more to such countries because of relatively more stable market conditions of the Southeast Asian region compared to China and Japan.

 

Our sales volume to the United States and Europe remained stable at an aggregate of 1.3 million tons in each of 2007 and 2008, and decreased to 1.2 million tons in 2009. A significant part of our sales in North America are made to USS-POSCO Industries (“UPI”), a 50-50 joint venture between U.S. Steel Corporation and us. We sell hot rolled products to UPI, which uses such products to manufacture cold rolled and galvanized steel products and tin-plate products for sale in the United States. Our sales to UPI were 494 thousand tons in 2007, 519 thousand tons in 2008 and 325 thousand tons in 2009.

 

Anti-Dumping and Countervailing Proceedings

 

In the United States, a number of our products have been subject to anti-dumping and countervailing proceedings since 1992. As a result of these proceedings, our sales of corrosion resistant steel are subject to a countervailing duty margin of 0.10% and an anti-dumping duty margin of 0.01% (which is effectively zero pursuant to the de minimis margin rule). Our sales of stainless steel plates are subject to an anti-dumping duty of 1.19% and our sales of stainless steel sheets are subject to an anti-dumping duty of 0.98%.

 

In China, we are subject to an anti-dumping duty of 11% on our sales of stainless cold rolled steel since December 2000. However, we entered into a suspension agreement in December 2000 with China and agreed to certain price undertakings. Since then, we have been exporting certain types of stainless cold rolled steel products to China that are exempt from such anti-dumping duty.

 

In India, our sales of stainless cold rolled steel have been subject to an anti-dumping duty ranging from $62.61 per ton to $234.98 per ton starting in November 2009 for a five-year period.

 

Recently, several countries have initiated anti-dumping investigations and other safeguard proceedings relating to our global sales operation. In Indonesia and Thailand, our sales of hot rolled products are subject to anti-dumping proceedings. Furthermore, Russia has initiated investigations into our sales of stainless steel products.

 

Our products that have been subject to anti-dumping or countervailing proceedings in the aggregate have not accounted for a material portion of our total sales in recent years. Consequently, the anti-dumping or countervailing duties imposed on our products have not had a material adverse effect on our total sales. However, there can be no assurance that further increases in or new imposition of dumping duties, countervailing duties, quotas or tariffs on our sales in the United States,

China, Europe or elsewhere may not have a material adverse effect on our exports to these or other regions in the future.

 

Pricing Policy

 

We determine the sales price of our products based on market conditions. In setting prices, we take into account our costs, including those of raw materials, supply and demand in the Korean market, exchange rates, and conditions in the international steel market.

 

Our export prices can fluctuate considerably over time, depending on market conditions and other factors. The export prices of our higher value-added steel products in the largest markets are determined considering the prices of similar products charged by our competitors. Our export prices in Dollar terms increased in 2007 and 2008 due to strong overseas demand, particularly from China and Japan, and increase in prices of raw materials such as iron ore and coal. However, we reduced our export prices in late 2008 in response to the intensification of the global financial crisis and continued to reduce our export prices in the first half of 2009. Starting in the third quarter of 2009, our export prices gradually started to recover due to an increase in demand driven by improvement in business confidence and higher level of economic activities as well as a decrease in our inventory level. We may decide to adjust our future sales prices on an on-going basis subject to market demand for our products, prices of raw materials, the production outlook of the global steel industry and global economic conditions in general.

 

Raw Materials

 

Steel Production

 

The principal raw materials used in producing steel through the basic oxygen steelmaking method are iron ore and coal. We import all of the coal and virtually all of the iron ore that we use. In 2009, POSCO imported approximately 41.7 million dry metric tons of iron ore and 21.7 million wet metric tons of coal. Iron ore is imported primarily from Australia, Brazil and South Africa. Coal is imported primarily from Australia, Canada and China.

 

In 2009, we purchased most of our iron ore and coal imports pursuant to long-term contracts. The long-term contracts generally have terms of three to ten years and provide for periodic price adjustments to the then-market prices. The long-term contracts to purchase iron ore and coal generally provide for annual adjustments to the purchase prices to be determined through negotiation between the supplier and us, which are typically retroactively implemented starting on April 1 of each year. Such price negotiations are driven by various factors, including the global economic outlook, global market prices of raw materials and steel products, supply and demand outlook of raw materials and production costs of raw materials. Typically, globally influenced buyers and sellers of raw materials determine benchmark prices of raw materials, based on which other buyers and sellers negotiate their prices after taking into consideration the quality of raw materials and other factors. We typically have an option to increase or decrease the fixed purchase amounts up to 5% or 10% each year. We or the suppliers may cancel the long-term contracts only if performance under the contracts is prevented by causes beyond our or their control and these causes continue for a specified period.

 

We also make investments in exploration and production projects abroad to enhance our ability to meet the requirements for high-quality raw materials, either as part of a consortium or through acquisition of a minority interest. We purchased approximately 18.3% of our iron ore and coal imports in 2009 from foreign mines in which we have made investments. Our major investments include an investment of A$424 million in July 2008 to acquire a 10% interest in Macarthur Coal Ltd. to secure approximately 1.0 million tons of coal per year. In April 2008, we also invested $200 million in a consortium with Pallinghurst Resources LLP, American Metals & Coal International, Inc. and Investee Limited to pursue various mining opportunities. As the first co-investment by the consortium, we acquired a 13% interest in a manganese project in Kalahari, South Africa, to secure approximately 130 thousand tons of manganese ore per year.

In December 2008, we invested $500 million to acquire a 6.5% interest in Nacional Minérios S.A., an iron ore mining company in Brazil, in a consortium with Japanese steel manufacturers and trading companies. In 2009, we started importing iron ore from the Brazilian venture and we expect to secure approximately 5.0 million tons annually by 2012. In July 2009, we also invested A$7.8 million to acquire a 16.64% interest in Jupiter Mines Ltd. to secure approximately 3.75 million tons of iron ore per year. We also made an initial investment of A$248 million in January 2010 to acquire a 3.75% interest in Roy Hill Holdings Pty., Ltd. We plan to increase our total shareholding interest in Roy Hill Holdings Pty., Ltd. by up to 15% by 2013 to secure approximately 8.25 million tons of iron ore per year. We will continue to seek opportunities to enter into additional strategic relationships that would enhance our ability to meet the requirements for principal raw materials.

 

The average price of coal per wet metric ton (benchmark free on board price of Australian premium hard coking coal) was $98 in 2007, $300 in 2008 and $129 in 2009. The average price of iron ore per dry metric ton (benchmark free on board price of Australian iron ore fines with iron (Fe) 60% content) was $48.30 in 2007, $86.80 in 2008 and $58.20 in 2009. We currently do not depend on any single country or supplier for our coal or iron ore.

 

Stainless Steel Production

 

The principal raw materials for the production of stainless steel are wrought nickel, ferrochrome, stainless steel scrap and carbon steel scrap. We purchase a substantial portion of our requirements for wrought nickel from leading producers in Australia, Indonesia, New Caledonia and Japan, as well as Korea. A substantial portion of the requirements for ferrochrome are purchased from producers in South Africa, India and Kazakhstan. Most of the requirements for stainless steel scrap are sourced from domestic and overseas suppliers in Japan, United States, European Union and Southeast Asian countries. As for the requirements for carbon steel scrap, scrap from the Pohang Steelworks is also utilized. The average price of nickel per ton (including insurance and freight costs) decreased from $37,230 in 2007 to $21,111 in 2008, and further decreased to $14,655 in 2009. The average price of scrap iron per ton (including insurance and freight costs) increased from $330 in 2007 to $462 in 2008 but decreased to $307 in 2009.

 

In order to secure stable sources of nickel for stainless steel production, we entered into a joint venture in May 2006 with Société Minière du Sud Pacifique S.A. to establish SNNC Co., Ltd. (“SNNC”) a company primarily engaged in nickel smelting. We hold a 49% interest in SNNC and Société Minière du Sud Pacifique S.A., a major mining company based in New Caledonia, holds the remaining 51% interest. SNNC operates a nickel smelting works with a production capacity of 30 thousand tons of nickel per year.

 

Transportation

 

Since 1983, we have retained a fleet of dedicated bulk carriers to transport our raw materials through long-term contracts with shipping companies in Korea. These dedicated bulk carriers transported approximately 87% of our coal and iron ore in 2009, with the remaining 13% transported by other vessels through chartering contracts. All imported raw materials are unloaded at our port facilities in Pohang and Gwangyang. Costs of transportation of iron ore and coal represented approximately 15% and 8% of the total cost of such materials in 2009.

 

The Steelmaking Process

 

Our major production facilities, Pohang Works and Gwangyang Works, produce steel by the basic oxygen steelmaking method. The stainless steel plant at Pohang Works produces stainless steel by the electric arc furnace method. Continuous casting improves product quality by imparting a homogenous structure to the steel. Pohang Works and Gwangyang Works produce all of their products through continuous casting.

Steel — Basic Oxygen Steelmaking Method

 

First, molten pig iron is produced in a blast furnace from iron ore, which is the basic raw material used in steelmaking. Molten pig iron is then refined into molten steel in converters by blowing pure oxygen at high pressure to remove impurities. Different desired steel properties may also be obtained by regulating the chemical contents.

 

At this point, molten steel is made into semi-finished products such as slab, blooms or billets at the continuous casting machine. Slab, blooms and billets are produced at different standardized sizes and shapes. Slab, blooms and billets are semi-finished lower margin products that we either use to produce our further processed products or sell to other steelmakers that produce further processed steel products.

 

Slab are processed to produce hot rolled coil products at hot strip mills or to produce plates at plate mills. Hot rolled coils are an intermediate stage product that may either be sold to our customers as various finished products or be further processed by us or our customers into higher value-added products, such as cold rolled sheets and silicon steel sheets. Blooms and billets are processed into wire rods at wire rod mills.

 

Stainless Steel — Electric Arc Furnace Method

 

Stainless steel is produced from stainless steel scrap, chrome, nickel and steel scrap using an electric arc furnace. Stainless steel is then processed into higher value-added products by methods similar to those used for steel production. Stainless steel slab are produced at a continuous casting mill. The slab are processed at hot rolling mills into stainless steel hot coil, which can be further processed at cold strip mills to produce stainless cold rolled steel products.

 

Competition

 

Domestic Market

 

We are the largest fully integrated steel producer in Korea. We generally face fragmented competition in the domestic market. In hot rolled products, where we had a market share of approximately 40% in 2009, we face competition from a Korean steel producer that operates mini-mills and produces hot rolled coil products from slabs and from various foreign producers, primarily from China and Japan. In cold rolled products and stainless steel products, where we had a market share of approximately 55% and 60%, respectively, in 2009, we compete with smaller specialized domestic manufacturers and various foreign producers, primarily from China and Japan. For a discussion of domestic market shares, see “— Markets — Domestic Market.”

 

We may face increased competition in the future from new specialized or integrated domestic manufacturers of steel products in the Korean market. Our biggest competitors in Korea are Hyundai Steel Co., Ltd. with an annual crude steel production of approximately 9.9 million tons and Dongbu Steel Co., Ltd. with an annual crude steel production of approximately 2.8 million tons. Hyundai Steel Co., Ltd. completed construction of an integrated steel mill with an annual capacity of 4 million tons and commenced its operation in January 2010.

 

The Korean Government does not impose quotas on or provide subsidies to local steel producers. As a World Trade Organization signatory, Korea has also removed all steel tariffs.

 

Export Markets

 

The competitors in our export markets include all the leading steel manufacturers of the world. In recent years, there has been a trend toward industry consolidation among our competitors, and smaller competitors in the global steel market today may become larger competitors in the future. For example, Mittal Steel’s takeover of Arcelor in 2006 created a company with approximately 10% of global steel production capacity. Competition from global steel manufacturers with expanded

production capacity such as ArcelorMittal, and new market entrants, especially from China and India, could result in a significant increase in competition. Major competitive factors include range of products offered, quality, price, delivery performance and customer service. Our larger competitors may use their resources, which may be greater than ours, against us in a variety of ways, including by making additional acquisitions, investing more aggressively in product development and capacity and displacing demand for our export products.

 

Various export markets currently impose tariffs on different types of steel products. However, we do not believe that tariffs significantly affect our ability to compete in these markets.

 

Subsidiaries and Global Joint Ventures

 

Steel Production

 

In order to effectively implement our strategic initiatives and to solidify our leadership position in the global steel industry, we have established various subsidiaries and global joint ventures around the world.

 

We established POSCO Specialty Steel Co., Ltd. as a wholly-owned subsidiary in Korea in February 1997. POSCO Specialty Steel produces high-quality steel products for the automotive, machinery, nuclear power plant, shipbuilding, aeronautics and electronics industries. Production facilities operated by POSCO Specialty Steel have an aggregate annual production capacity of 842 thousand tons of wire rods, round bars, steel pipes and semi-finished products. POSCO Specialty Steel Co., Ltd. produced 673 thousand tons of such products in 2009.

 

In order to expand our sale of value-added products, we established POSCO Coated and Color Sheet Co., Ltd. by merging a coated steel manufacturer and a color sheet manufacturer in March 1999. POSCO Coated and Color Sheet produces 600 thousand tons a year of both galvanized and aluminized steel sheets widely used in the construction, automotive parts and home appliances industries. POSCO Coated and Color Sheet also produces color sheets with an annual capacity of 350 thousand tons that are mainly used for interior and exterior materials and home appliances.

 

We entered into an agreement with Sagang Group Co. to establish Zhangjiagang Pohang Stainless Steel Co., Ltd., a joint venture company in China for the manufacture and sale of stainless cold rolled steel products. We have an 82.5% interest in the joint venture (including 23.9% interest held by POSCO China Holding Corporation). The plant commenced production of stainless cold rolled steel products in December 1998. The joint venture also completed the construction of new mills in July 2006 with additional annual production capacity of approximately 800 thousand tons of stainless hot rolled products. Zhangjiagang Pohang Stainless Steel produced 747 thousand tons of stainless steel products in 2009.

 

We established Qingdao Pohang Stainless Steel Co., Ltd., a wholly owned subsidiary set up to manufacture and sell stainless cold rolled steel products in China. Construction of the plant operated by Qingdao Pohang Steel began in April 2003 and became operational in December 2004, with an annual production capacity of 180 thousand tons of stainless cold rolled steel products. Qingdao Pohang Steel produced 152 thousand tons of such products in 2009.

 

In August 2003, we entered into a joint venture agreement with Benxi Iron and Steel Group in China to establish Benxi Steel POSCO Cold Rolled Sheet Co., Ltd. and build a cold rolling mill with annual production capacity of 1.9 million tons. The cold rolling mill became operational in March 2006 and produced 1.5 million tons of such products in 2009. We currently hold a 25% interest in this joint venture.

 

In November 2003, we launched POSCO China Holding Corporation, a wholly-owned holding company for our investments in China. POSCO China Holding Corporation also provides support to our Chinese investment projects and affiliated companies with their marketing efforts in China and solidifies their business relationships with clients and suppliers.

In addition to the above investments, we are carefully seeking out additional promising investment opportunities abroad. In June 2005, we entered into a memorandum of understanding with Orissa State Government of India for the construction of an integrated steel mill and the development of iron ore mines in Orissa State. We estimate the aggregate costs of the initial phase of construction and mine development to be approximately $3.7 billion and an additional cost of approximately $8.3 billion in order to increase the annual production capacity to 12 million tons of plates and hot rolled products. In 2008, we obtained stage one clearance for 2,959 acres of forest land from the Indian Supreme Court, and acquired approximately 500 acres of land for the construction of a steel mill and a port. In the process of acquiring land for construction, we have provided rehabilitation and resettlement packages (including construction of 60 transit homes) for local residents affected by our project. Currently, we are in the process of acquiring approximately 4,000 acres of land for the construction and obtaining regulatory approvals and mining rights for the development of iron ore mines.

 

We entered into an agreement with Nippon Steel Corporation to establish POSCO Vietnam Co., Ltd., a joint venture company in Vietnam for the manufacture and sale of cold rolled steel products. We have an 85% interest in the joint venture. We completed the construction of a plant in September 2009 with an annual production capacity of 1.2 million tons of cold rolled products and commenced commercial production.

 

In Mexico, we completed the construction of a plant in August 2009 with an annual production capacity of 0.4 million tons of cold rolled products and commenced commercial production to supply automotive manufacturers in Mexico, Southeastern United States and South America.

 

In the United States, we entered into a joint venture in March 2007 with US Steel and SeAH to establish United Spiral Pipe to produce American Petroleum Institute-compliant pipes (“API Pipes”) targeting customers in the United States, Canada and Mexico. We hold a 35% interest in the company. US Steel and we each supply 50% of the hot rolled steel required for the production of pipes. In response to weak demand for the API Pipes in recent years, United Spiral Pipe is currently producing non-API Pipes that are used for general construction piling purposes. We started test production of such products in February 2010, and we expect to restart production of API Pipes upon recovery of the market.

 

In order to secure an alternative sales source for stainless hot rolled steel products and an export base for expanding into the Southeast Asia stainless steel markets, we acquired a 15% interest in Thainox Stainless Public Company Limited, a major stainless steel manufacturer in Thailand, in 2007.

 

We have also established supply chain management centers around the world to provide processing and logistics services such as cutting flat steel products to smaller sizes to meet customers’ needs. In 2009, our 42 supply chain management centers recorded aggregate sales of 2.6 million tons of steel products.

 

Steel Trading

 

Our trading activities consist of exporting and importing a wide range of steel products that are both obtained from and supplied to POSCO, as well as between other suppliers and purchasers in Korea and overseas. To strengthen our global market presence, we are coordinating these trading activities through a global trading network comprised of overseas subsidiaries, branches and representative offices. Such subsidiaries and offices support our trading activities by locating suitable local suppliers and purchasers on behalf of ourselves as well as customers, identifying business opportunities and providing information regarding local market conditions. Our consolidated subsidiaries engaged in steel trading include POSCO Steel Service & Sales Co., Ltd. that primarily focuses in the domestic market, and POSCO Asia Company Limited located in Hong Kong, POSCO Japan Co., Ltd. located in Tokyo, Japan and POSCO America Corporation located in New Jersey, U.S.A.

Engineering and Construction

 

POSCO E&C is one of the leading engineering and construction companies in Korea, primarily engaged in the planning, design and construction of industrial plants and architectural works and civil engineering projects. In particular, POSCO E&C has established itself as one of the premier engineering and construction companies in Korea through:

 

 

Leveraging its technical know-how and track record of building some of the leading industrial complexes in Korea, POSCO E&C has also focused on diversifying its operations into construction of high-end apartment complexes and participating in a wider range of architectural works and civil engineering projects, as well as engaging in urban planning and development projects and expanding its operations abroad. One of its landmark urban planning and development projects includes the development of a 5.7 million-square meter area of Songdo International City in Incheon, which POSCO E&C is co-developing with Gale International, a respected real estate developer based in the United States. POSCO E&C also invested approximately Won 319 billion in April 2008 to acquire an 88.7% equity interest in Daewoo Engineering Company, a leading engineering company in Korea with expertise in chemical and petrochemical, energy, industrial plant and civil works.

 

Energy

 

We have accumulated several decades of experience and know-how in a wide range of energy-related fields, including natural gas and other forms of power generation. As part of our diversification efforts, we strive to identify appropriate opportunities for power generation, renewable energy projects, liquefied natural gas logistics and natural gas exploration.

 

In order to make inroads into the power generation business, in 2006 we completed the acquisition of the largest domestic private power generation company that operates a liquefied natural gas combined cycle power plant with total power generation capacity of 1,800 megawatts and renamed it POSCO Power Corporation. In 2008, POSCO Power Corporation commenced construction of a liquefied natural gas combined cycle power plant in Incheon with total power generation capacity of 1,200 megawatts. Construction of the liquefied natural gas combined cycle plant is expected to be completed in 2011. POSCO Power Corporation plans to continue to expand its power generation capacity. In order to meet the increasing demand for clean and renewable sources of energy, POSCO Power Corporation signed a strategic partnership agreement in February 2007 with FuelCell Energy, a global leader in molten carbonate fuel cell technology, pursuant to which POSCO Power Corporation will explore opportunities to expand into the stationary fuel cell market. POSCO Power Corporation completed construction of a fuel cell manufacturing plant with an annual production capacity of 50 megawatts in Pohang in 2008 with the objective of enhancing the company’s ability to meet the growing demands for clean and renewable energy.

 

In an effort to reduce our dependency on oil and to comply with the carbon emissions regulations of the United Nations Framework Convention on Climate Change, we became the first company in Korea in the private sector to import liquefied natural gas in 2005 and have been using natural gas in lieu of oil for energy generation at our steel production facilities. We constructed the Gwangyang liquefied natural gas receiving terminal, which is equipped with two 100,000 cubic meter storage tanks. In July 2007, we began expanding the terminal to increase the storage capacity from 200,000 cubic meters to 365,000 cubic meters by May 2011.

 

We are also actively seeking business opportunities in the exploration and production of oil and natural gas. In 2007, we participated in the Aral Sea Exploration Project in the Republic of Uzbekistan (“Uzbekistan”), purchasing a 9.8% interest from the Korea National Oil Corporation. Additionally, we

acquired a 12.5% interest in 2008 in the Namangan-Tergachi and Chust-Pap Oil and Gas Exploration Project in Uzbekistan. In May 2010, we were also selected as the preferred bidder for a 68% interest in Daewoo International Corporation, a global trading company that primarily engages in trading of steel and raw materials as well as investing in energy development projects. Daewoo International had total revenues of Won 11,544 billion in 2009, total net income of Won 131 billion in 2009 and total assets of Won 4,695 billion as of December 31, 2009. Daewoo International Corporation has invested in a portfolio of energy exploration and production projects, including oil and gas projects located in Peru, Oman, Vietnam, Myanmar, Uzbekistan and Russia, as well as mineral projects located in Australia, Bolivia and Madagascar. Our final decision to purchase the controlling interest is subject to satisfactory completion of additional due diligence of the company.

 

Others

 

We acquired or established several subsidiaries that address specific services to support the operations of Pohang Works and Gwangyang Works. POSCON Co., Ltd., acquired in 1986, provides industrial engineering services to member companies of the POSCO Group and manufacturing services utilizing automation technology. POSDATA Co., Ltd., founded in 1989, provides information and technology consulting and system network integration and outsourcing services. In January 2010, POSDATA Co., Ltd. merged with POSCON Co., Ltd. and changed its name to POSCO ICT Co., Ltd.

 

POSCO Machinery & Engineering Co., Ltd. and POSCO Machinery Co., Ltd. were established to perform maintenance of our manufacturing equipment. POSCO Refractories and Environment Company Ltd. manufactures refractories and industrial furnaces.

 

We also entered into a joint venture with Mitsui Corporation of Japan and hold a 51.0% interest in POSCO Terminal Co., Ltd. that provides logistics services related to storage and transportation of raw materials used in steel production and other industries. Facilities operated by POSCO Terminal Co., Ltd. currently have an annual handling capacity of 6.3 million tons. We also entered into a joint venture with Nippon Steel Corporation and hold a 70.0% interest in POSCO-Nippon Steel RHF Joint Venture Co., Ltd. that supplies direct reduced iron and recycling services of dry dust generated in our steelworks.

 

Insurance

 

As of December 31, 2009, our property, plant and equipment are insured against fire and other casualty losses up to Won 16,947 billion. In addition, we carry general insurance for vehicles and accident compensation insurance for our employees to the extent we consider appropriate.

 

 

The following table sets out the jurisdiction of incorporation and our ownership interests of our significant subsidiaries:

 

 

 

Our principal properties are Pohang Works, which is located at Youngil Bay on the southeastern coast of Korea, and Gwangyang Works, which is located in Gwangyang City in the southwestern region of Korea. We expect to increase our production capacity in the future when we

increase our capacity as part of our facilities expansion or as a result of continued modernization and rationalization of our existing facilities. For a discussion of major items of our capital expenditures currently in progress, see “Item 5. Operating and Financial Review and Prospects — Item 5.B. Liquidity and Capital Resources — Liquidity — Capital Expenditures and Capital Expansion.”

 

Pohang Works

 

Construction of Pohang Works began in 1970 and ended in 1983. Pohang Works currently has an annual crude steel and stainless steel production capacity of 15.0 million tons. Pohang Works produces a wide variety of steel products. Products produced at Pohang Works include hot rolled sheets, plates, wire rods and cold rolled sheets, as well as specialty steel products such as stainless steel sheets and silicon steel sheets. These products can also be customized to meet the specifications of our customers.

 

Situated on a site of 8.9 million square meters at Youngil Bay on the southeastern coast of Korea, Pohang Works consists of 40 plants, including iron-making, crude steelmaking and continuous casting and other rolling facilities. Pohang Works also has docking facilities capable of accommodating ships as large as 200,000 tons for unloading raw materials, storage areas for up to 34 days’ supply of raw materials and separate docking facilities for ships carrying products for export. Pohang Works is equipped with a highly advanced computerized production-management system allowing constant monitoring and control of the production process.

 

The following table sets out Pohang Works’ capacity utilization rates for the periods indicated.

 

 

 

 

Gwangyang Works

 

Construction of Gwangyang Works began in 1985 on a site of 13.7 million square meters reclaimed from the sea in Gwangyang City in the southwestern region of Korea. Gwangyang Works currently has an annual crude steel production capacity of 18.0 million tons. Gwangyang Works specializes in high volume production of a limited number of steel products. Products manufactured at Gwangyang Works include both hot and cold rolled types.

 

Gwangyang Works is comprised of 43 plants, including iron-making plants, steelmaking plants, continuous casting plants, hot strip mills and thin-slab hot rolling plants. The site also features docking and unloading facilities for raw materials capable of accommodating ships of as large as 300,000 tons for unloading raw materials, storage areas for 38 days’ supply of raw materials and separate docking facilities for ships carrying products for export.

 

We believe Gwangyang Works is one of the most technologically advanced integrated steel facilities in the world. Gwangyang Works has a completely automated, linear production system that enables the whole production process, from iron-making to finished products, to take place without interruption. This advanced system reduces the production time for hot rolled products to only four hours. Like Pohang Works, Gwangyang Works is equipped with a highly advanced computerized production-management system allowing constant monitoring and control of the production process.

Capacity utilization has kept pace with increases in capacity. The following table sets out Gwangyang Works’ capacity utilization rates for the periods indicated.

 

 

 

 

The Environment

 

We believe we are in compliance with applicable environmental laws and regulations in all material respects. Our levels of pollution control are higher than those mandated by Government standards. We established an on-line environmental monitoring system with real-time feedback on pollutant levels and a forecast system of pollutant concentration in surrounding areas. We also undergo periodic environmental inspection by both internal and external inspectors in accordance with ISO 14001 standards to monitor execution and maintenance of our environmental management plan. We recently invested in comprehensive flue gas treatment facilities at some of our sinter plants, dust collector at steelmaking plants and coke wastewater treatment facilities. In addition, we recycle most of the by-products from the steelmaking process. We also have been developing environmentally friendly products such as chrome-free steel sheets in an effort to compete with products from the European Union, the United States and Japan and to meet strengthened environmental regulations. Anticipating the trend toward increasing regulation of chrome in various steel products, we introduced chrome-free steel products meeting international environmental standards in 2006 that are used to manufacture automotive oil tanks.

 

We plan to continue to invest in developing more environmentally friendly steel manufacturing processes. We commenced research and development for a new steel manufacturing technology called FINEX in 1992 jointly with the Research Institute of Industrial Science and Technology and VOEST Alpine, an Australian company, and we completed the construction of our first FINEX plant in May 2007 with an annual steel production capacity of 1.5 million tons. We increased the annual steel production capacity to 2.1 million tons in 2008. We will continue to refine FINEX, a low cost, environmentally friendly steel manufacturing process that we believe optimizes our production capacity by utilizing non-agglomerated iron ore fines and using non-coking coal as an energy source and a reducing agent. We believe that FINEX offers considerable environmental and economic advantages by eliminating major sources of pollution such as sinter and coke plants, as well as decreasing operating and raw material costs.

 

In response to increasingly strict regulation on greenhouse gas emissions as outlined in the Kyoto Protocol, we engage in various Clean Development Mechanism (“CDM”) projects to strive to reduce carbon dioxide emissions during the steel manufacturing process and acquire certified emission reductions. For instance, in July 2008, we obtained an approval issued by the CDM Executive Board governed by the United Nations Framework Convention on Climate Change for the operation of a hydroelectric power plant. Additionally, in joint efforts with Nippon Steel Corporation, we are in the process of developing a low-emission Rotary Hearth Furnace facility to be located at Gwangyang Works. As part of our commitment to global forest conservation, we also established an entity in Uruguay to engage in afforestation and reforestation projects.

 

POSCO spent Won 494 billion in 2007, Won 215 billion in 2008 and Won 297 billion in 2009 on anti-pollution facilities. In 2009, approximately 10% of our investments in facilities were dedicated to investing in low-emission, anti-pollution facilities.

 

We do not have any unresolved comments from the Securities and Exchange Commission staff regarding our periodic reports under the Exchange Act of 1934.

 

 

 

The following discussion and analysis is based on our consolidated financial statements, which have been prepared in accordance with Korean GAAP. Korean GAAP varies in certain significant respects from accounting principles generally accepted in the United States of America. Information relating to the nature and effect of such differences is presented in Note 31 to the Consolidated Financial Statements.

 

Overview

 

We are the largest fully integrated steel producer in Korea. We have four reportable operating segments — a steel segment, an engineering and construction segment, a trading segment and a segment that contains operations of all other entities which fall below the reporting thresholds. The steel segment includes production of steel products and sale of such products. The engineering and construction segment includes planning, designing and construction of industrial plants, civil engineering projects and commercial and residential buildings, both in Korea and overseas. The trading segment consists of exporting and importing a wide range of steel products that are both obtained from and supplied to POSCO, as well as between other suppliers and purchasers in Korea and overseas. The “others” segment includes power generation, liquefied natural gas production, network and system integration, logistics and magnesium coil and sheet production. See Note 30 of Notes to Consolidated Financial Statements.

 

One of the major factors contributing to our historical performance has been the growth of the Korean economy, and our future performance will depend at least in part on Korea’s general economic growth and prospects. For a description of recent developments that have had and may continue to have an adverse effect on our results of operations and financial condition, see “Item 3. Key Information — Item 3.D. Risk Factors — Korea is our most important market, and our current business and future growth could be materially and adversely affected if economic conditions in Korea deteriorate.” A number of other factors have had or are expected to have a material impact on our results of operations, financial condition and capital expenditures. These factors include:

 

 

As a result of these factors, our financial results in the past may not be indicative of future results or trends in those results.

 

Sales Volume, Prices and Product Mix

 

In recent years, our net sales have been affected by the following factors:

 

 

Domestic demand for our products is affected by the condition of major steel consuming industries, such as construction, shipbuilding, automotive, electrical appliances and downstream steel processors, and the Korean economy in general.

 

Our crude steel output increased from 32.8 million tons in 2007 to 34.7 million tons in 2008, and sales volume increased from 32.1 million tons in 2007 to 33.5 million tons in 2008 primarily due to an increase in production resulting from commencement of operation of the dephosphorization converter at Gwangyang Works and productivity improvement. In 2009, our crude steel output decreased to 31.7 million tons and sales volume decreased to 31.1 million tons. In response to sluggish demand from our customers in industries adversely impacted by deteriorating global economic conditions in the second half of 2008, such as automotive and construction industries, we reduced our crude steel production and sales prices in December 2008 and the first quarter of 2009. Signs that the pace of deterioration in market conditions had slowed began to appear in the second quarter of 2009, however, and demand from certain segments of our customer base, including the domestic automotive and construction industries, showed signs of recovery starting in the second quarter of 2009. In response, we began to incrementally increase our crude steel production starting in April 2009 and our production level normalized in the second half of 2009. As a result of production cuts in the first half of 2009, prices for our steel products remained depressed until the third quarter of 2009, during which time prices started to recover and continued to gradually increase up to the end of 2009.

 

In 2008, unit sales price in Won for all of our principal product lines increased, and the weighted average unit prices for our products increased by 23.3%, in part due to depreciation of the Won against the Dollar in 2008 that contributed to an increase in our export prices in Won terms. The average exchange rate of the Won against the Dollar depreciated from Won 929.2 per Dollar in 2007 to Won 1,102.6 per Dollar in 2008. Unit sales price of hot rolled products, which accounted for 25.9% of total sales volume, increased by 46.4% in 2008. Unit sales price of wire rods, which accounted for 7.5% of total sales volume, increased by 35% in 2008. Unit sales price of plates, which accounted for 14.5% of total sales volume, increased by 33.8% in 2008. Unit sales price of silicon steel sheets, which accounted for 3.1% of total sales volume, increased by 30% in 2008. Unit sales price of cold rolled products, which accounted for 38% of total sales volume, increased by 29.2% in 2008. Unit sales price of stainless steel products, which accounted for 6.1% of total sales volume, increased by 15% in 2008.

 

In 2009, unit sales price in Won for our principal product lines, other than silicon steel sheets, decreased, and the weighted average unit prices for our products decreased by 5.2% in 2009 compared to 2008 despite a depreciation in the average value of the Won against the Dollar in 2009 compared to 2008 that contributed to an increase in our export prices in Won terms. The average exchange rate of the Won against the Dollar depreciated from Won 1,102.6 per Dollar in 2008 to Won 1,276.4 per Dollar in 2009. Unit sales price of stainless steel products, which accounted for 7.3% of total sales volume, decreased by 23.5% in 2009. Unit sales price of hot rolled products, which accounted for 25.8% of total sales volume, decreased by 7.8% in 2009. Unit sales price of wire rods, which accounted for 7.8% of total sales volume, decreased by 2.8% in 2009. Unit sales price of cold rolled products, which accounted for 36.2% of total sales volume, decreased by 2.2% in 2009. Unit sales price of plates, which accounted for 14.7% of total sales volume, decreased by 1.9% in 2009. On the other hand, unit sales price of silicon steel sheets, which accounted for 2.9% of total sales volume, increased by 8.1% in 2009.

 

Our export prices in Dollar terms increased in 2008 driven by increases in prices of raw materials such as iron ore and coal. Partly in response to the weakening demand resulting from the global economic downturn, however, our export prices in dollar terms decreased in the first half of 2009. Starting in the third quarter of 2009, our export prices in dollar terms gradually started to recover due to an increase in demand driven by improvement in business confidence and higher level of economic activities as well as a decrease in our inventory level. We may decide to adjust our future export sales prices on an on-going basis subject to market demand for our products, the production

outlook of the global steel industry and global economic conditions in general. See “Item 4. Information on the Company — Item 4.B. Business Overview — Markets — Exports.”

 

The table below sets out the average unit sales prices for our semi-finished and finished steel products for the periods indicated.