UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

 

FORM 10-Q

 

(Mark One)

 

 

For the quarterly period ended March 31, 2018

 

Or

 

 

For the transition period from               to               

 

Commission file number 000-30941

 

AXCELIS TECHNOLOGIES, INC.

(Exact name of registrant as specified in its charter)

 

 

108 Cherry Hill Drive

Beverly, Massachusetts 01915

(Address of principal executive offices, including zip code)

 

(978) 787-4000

(Registrant’s telephone number, including area code)

 

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.  Yes ☒  No ☐.

 

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).  Yes ☒  No ☐.

 

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

 

 

If an emerging growth company, indicate by check mark if registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act.    ☐

 

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act)  Yes ☐ No ☒

 

As of May 1, 2018 there were 32,145,565 shares of the registrant’s common stock outstanding.

 

 

 

Table of Contents

 

 

 

PART 1—FINANCIAL INFORMATION

 

Item 1.    Financial Statements.

 

Axcelis Technologies, Inc.

Consolidated Statements of Operations

(In thousands, except per share amounts)

(Unaudited)

 

 

See accompanying Notes to these Consolidated Financial Statements

 

Axcelis Technologies, Inc.

Consolidated Statements of Comprehensive Income

(In thousands)

(Unaudited)

 

 

See accompanying Notes to these Consolidated Financial Statements

Axcelis Technologies, Inc.

Consolidated Balance Sheets

(In thousands, except per share amounts)

(Unaudited)

 

 

 

See accompanying Notes to these Consolidated Financial Statements

 

Axcelis Technologies, Inc.

Consolidated Statements of Cash Flows

(In thousands)

(Unaudited)

 

 

See accompanying Notes to these Consolidated Financial Statements

 

Axcelis Technologies, Inc.

Notes to Consolidated Financial Statements (Unaudited)

 

Note 1.  Nature of Business

 

Axcelis Technologies, Inc. (“Axcelis” or the “Company”) was incorporated in Delaware in 1995, and is a producer of ion implantation and other processing equipment used in the fabrication of semiconductor chips in the United States, Europe and Asia. In addition, the Company provides extensive worldwide aftermarket service and support, including spare parts, equipment upgrades, used equipment and maintenance services to the semiconductor industry.

 

The accompanying unaudited consolidated financial statements have been prepared in accordance with U.S. generally accepted accounting principles for interim financial information and with the instructions to Form 10-Q and Article 10 of Regulation S-X. Accordingly, they do not include all of the information and footnotes required by generally accepted accounting principles for complete financial statements. In the opinion of management, all adjustments which are of a normal recurring nature and considered necessary for a fair presentation of these financial statements have been included. Operating results for the interim period presented are not necessarily indicative of the results that may be expected for other interim periods or for the year as a whole.

 

The balance sheet at December 31, 2017 has been derived from the audited consolidated financial statements at that date but does not include all of the information and footnotes required by generally accepted accounting principles for complete financial statements. For further information, refer to the consolidated financial statements and footnotes thereto included in Axcelis Technologies, Inc.’s Annual Report on Form 10-K for the year ended December 31, 2017.

 

 

Note 2.  Stock-Based Compensation

 

The Company maintains the Axcelis Technologies, Inc. 2012 Equity Incentive Plan (the “2012 Equity Plan”), which became effective on May 2, 2012, and permits the issuance of options, restricted stock, restricted stock units and performance awards to selected employees, directors and consultants of the Company. The Company’s 2000 Stock Plan (the “2000 Stock Plan”) expired on May 1, 2012 and no new grants may be made under that plan after that date.  However, unexpired awards granted under the 2000 Stock Plan remain outstanding and subject to the terms of the 2000 Stock Plan. The Company also maintains the Axcelis Technologies, Inc. Employee Stock Purchase Plan (the “ESPP”), an Internal Revenue Code Section 423 plan.

 

The 2012 Equity Plan and the ESPP are more fully described in Note 11 to the consolidated financial statements in the Company’s 2017 Annual Report on Form 10-K.

 

The Company recognized stock-based compensation expense of $1.1 million for each of the three month periods ended March 31, 2018 and 2017 related to restricted stock units and non-qualified stock options.

 

In the three month periods ended March 31, 2018 and 2017, the Company issued 0.1 million and 0.5 million shares of common stock, respectively, in relation to stock option exercises and vesting of restricted stock units. In the three month periods ended March 31, 2018 and 2017, the Company received proceeds of $0.4 million and $2.5 million, respectively, in connection with the exercise of stock options.

 

Note 3.  Revenue

 

We design, manufacture and service ion implantation and other processing equipment used in the fabrication of semiconductor chips and sell our products to leading semiconductor chip manufacturers worldwide. We offer a complete line of high energy, high current and medium current implanters (“Systems”) for all application requirements. In addition, we provide extensive aftermarket lifecycle products and services (“Aftermarket”), including used tools, spare parts, equipment upgrades, maintenance service and customer training.

 

Under Financial Accounting Standards Board (“FASB”) Accounting Standards Codification (“ASC”) Topic 606, Revenue from Contracts with Customers or (“ASC 606”), revenue is recognized when a customer obtains control of promised goods or services in an amount that reflects the consideration we expect to receive in exchange for those goods or services. We measure revenue based on the consideration specified in the client arrangement, and revenue is recognized when the performance obligations in the client arrangement are satisfied. A performance obligation is a promise in a contract to transfer a distinct product or service to the customer. The transaction price of a contract is allocated to each distinct performance obligation based upon the relative standalone selling price for each performance obligation and recognized as revenue when or as, the customer receives the benefit of the performance obligation. See Footnote 14 regarding the impact of the adoption of ASC 606 on our financial statements. To achieve this core principle, the Company applies the following five steps:

 

A contract with a customer exists when (i) the Company enters into an enforceable contract with a customer that defines each party’s rights regarding the goods or services to be transferred and identifies the related payment terms, (ii) the contract has commercial substance, and (iii) the Company determines that collection of substantially all consideration for goods and services that are transferred is probable based on the customer’s intent and ability to pay the promised consideration.

 

Performance obligations promised in a contract are identified based on the goods and services that will be transferred to the customer that are both capable of being distinct, whereby the customer can benefit from the good or service either on its own or together with other available resources, and are distinct in the context of the contract, whereby the transfer of the good or service is separately identifiable from other promises in the contract. To the extent a contract includes multiple promised goods and services, the Company must apply judgment to determine whether promised goods and services are capable of being distinct and distinct in the context of the contract. If these criteria are not met, the promised goods and services are accounted for as a combined performance obligation.

 

Our Systems sales consist of multiple performance obligations, including the system itself and obligations that are not delivered simultaneously with the system. These undelivered obligations might include a combination of installation services, extended warranty and support and spare parts, all of which are generally covered by a single sales price.

 

Our aftermarket business includes both products and services type arrangements. Performance obligations in these contracts consist of used tools, spare parts, equipment upgrades, maintenance services and customer training.

Customers who purchase new systems are provided an assurance-type warranty for one year after acceptance of the tool. For Aftermarket transactions, we provide customers an assurance-type warranty for 90 days. Customers can choose to purchase extended warranty terms with enhanced support similar to a service-type warranty ranging from one to three years. In accordance with ASC 606, assurance-type warranties are not considered a performance obligation, whereas service-type warranties are. 

 

The transaction price is determined based on the consideration to which the Company will be entitled in exchange for transferring goods and services to the customer. To the extent the transaction price includes variable consideration, the Company estimates the amount of variable consideration that should be included in the transaction price utilizing either the expected value method or the most likely amount method depending on the nature of the variable consideration. Variable consideration is included in the transaction price if, in the Company’s judgment, it is probable that a significant future reversal of cumulative revenue under the contract will not occur. Any estimates, including the effect of the constraint on variable consideration, are evaluated at each reporting period for any changes. In applying this guidance, Companies must also consider whether any significant financing components exist.

 

The transaction price for all transactions is based on the price reflected in the individual customers purchase order. Variable consideration has not been identified as a significant component of the transaction price for any of our transactions.

 

For those transactions where all performance obligations will be satisfied within one year or less, the Company is applying the practical expedient outlined in ASC 606-10-32-18. This practical expedient allows the Company not to adjust promised consideration for the effects of a significant financing component if the Company expects at contract inception the period between when the Company transfers the promised good or service to a customer and when the customer pays for that good or service will be one year or less. For those transactions that are expected to be completed after one year, the Company has assessed that there are no significant financing components because any difference between the promised consideration and the cash selling price of the good or service is for reasons other than the provision of financing.

 

If the contract contains a single performance obligation, the entire transaction price is allocated to the single performance obligation. Contracts that contain multiple performance obligations require an allocation of the transaction price to each performance obligation on a relative standalone selling price basis unless the transaction price is variable and meets the criteria to be allocated entirely to a performance obligation or to a distinct service that forms part of a single performance obligation.

 

Where required, the Company determines standalone selling price (SSP) for each obligation based on consideration of both market and Company specific factors, including the selling price and profit margin for similar products, the cost to produce, and the anticipated margin

 

For those contracts that contain multiple performance obligations (primarily systems sales, as well as some aftermarket contracts requiring both time and material inputs), the company must determine SSP. The Company used a cost plus margin approach in determining the SSP for any materials related performance obligations (such as upgrades, spare parts, systems). To determine the SSP for labor related performance obligations (such as the labor component of installation), the Company used directly observable inputs based on the standalone sale prices for these services.

 

The Company satisfies performance obligations either over time or at a point in time. Revenue is recognized over time if either 1) the customer simultaneously receives and consumes the benefits provided by the entity’s performance, 2) the entity’s performance creates or enhances an asset that the customer controls as the asset is created or enhanced, or 3) the entity’s performance does not create an asset with an alternative use to the entity and the entity has an enforceable right to payment for performance completed to date. If the entity does not satisfy a performance obligation over time, the related performance obligation is satisfied at a point in time by transferring the control of a promised good or service to a customer. Examples of control are using the asset to produce goods or services, enhance the value of other assets, settle liabilities, and holding or selling the asset.  For over time recognition, ASC 606 requires the Company to select a single revenue recognition method for the performance obligation that faithfully depicts the Company’s performance in transferring control of the goods and services. The guidance allows entities to choose between two methods to measure progress toward complete satisfaction of a performance obligation:

Output methods - recognize revenue on the basis of direct measurements of the value to the customer of the goods or services transferred to date relative to the remaining goods or services promised under the contract (e.g. surveys of performance completed to date, appraisals of results achieved, milestones reached, time elapsed, and units of produced or units delivered); and

Input methods - recognize revenue on the basis of the entity’s efforts or inputs to the satisfaction of a performance obligation (e.g., resources consumed, labor hours expended, costs incurred, or time elapsed) relative to the total expected inputs to the satisfaction of that performance obligation.

 

The Company has the right to consideration from a customer in an amount that corresponds directly with the value to the customer of the entity’s performance completed to date (i.e. certain aftermarket contracts), as such

the Company has elected a practical expedient to recognize revenue in the amount to which the entity has a right to invoice for such services.

 

Product related revenues (whether for systems or aftermarket business) are recognized at a point in time, when they are shipped or delivered, depending on shipping terms. 

 

For installation services, revenue is recognized at a point in time, once the installation of the tool is complete. The nature of the installation services are such that the customer does not simultaneously receive and consume the benefits provided by the entity’s performance, nor does performance of installation services create or enhance an asset that the customer controls. Installation services do not create an asset with an alternative use to the entity, and the entity does not have an enforceable right to payment for performance completed to date. 

 

Service-type warranties for any product are recognized over time, as these represent a stand ready obligation to service the product during the warranty period. Progress in the satisfaction of these performance obligations will be measured using an input method of time elapsed.

 

Maintenance and service contracts are recognized over time.  Progress in the satisfaction of these performance obligations will be measured using an input method of either time elapsed in the case of fixed period contracts, or labor hours expended, in the case of project based contracts.

 

Cost to Obtain and Fulfill a Contract with a Customer

The Company recognizes an asset related to incremental costs of obtaining a contract with a customer if the Company expects to recover those costs. The Company will recognize an asset from costs incurred to fulfill a contract only if such costs relate directly to a contract that the entity can specifically identify, the costs generate or enhance resources of the Company that will be used in satisfying performance obligations in the future, and the costs are expected to be recovered. Any assets recognized related to costs to obtain or fulfill a contract are amortized on a systematic basis that is consistent with the transfer to the customer of the goods or services to which the asset relates.

 

In substantially all of our business transactions, we incur incremental costs to obtain contracts with customers, in the form of sales commissions. We maintain a commission program which awards our employees for System sales, aftermarket activity and other individual goals. Under ASC 606, an asset shall be amortized on a systematic basis that is consistent with the transfer to the customer of the goods or services to which the asset relates. However, ASC 606 provides a practical expedient to allow for the recognition of commission expense when incurred if the amortization period of the asset that the entity otherwise would have recognized is one year or less. Based on the nature of the Company’s commission agreements, all commissions are expensed as incurred based upon the expectation that the amortization period would be one year or less. 

 

Revenue Categories used by Management

 

Our business operates in the following fundamental disciplines: Systems and Aftermarket.

 

Revenue by categories used by management are as follows:

 

 

*The impact upon adoption of ASC 606 was an increase to Systems revenue of $1.0 million.

 

The increase in revenue in the three months ended March 31, 2018, in comparison to the three months ended March 31, 2017, is attributable to an increase in sales of our Purion products.

 

Economic factors affecting our revenue

 

Global economic conditions have a direct impact on our revenue. We are substantially dependent on sales of our products and services to customers outside the United States. Adverse economic conditions such as political and economic instability, potential adverse tax consequences and volatility in exchange rates pose a risk that our clients may reduce, postpone or cancel spending for our products and services, which would impact our revenue.

 

Revenue by geographic markets is determined based upon the location of where our products are shipped and our services are performed. Revenue in our principal geographic markets is as follows:

 

 

*The impact upon adoption of ASC 606 was an increase in revenue to Asia of $1.5 million and decreases of $0.3 million and $0.2 million to North America and Europe, respectively.

 

Contract assets and liabilities

 

Contract assets and contract liabilities are as follows:

 

Contract liabilities are reflected as deferred revenue on the consolidated balance sheet. Contract liabilities relate to payments invoiced or received in advance of completion of performance obligations under a contract. Contract liabilities are recognized as revenue upon the fulfillment of performance obligations. The change in contract liabilities of $5.0 million from March 31, 2017 to December 31, 2017 is primarily due to the increase of deferrals relating to the sale of new systems.

 

System transactions have payment terms that are 90% due upon shipment of the tool and 10% due upon installation. Aftermarket transaction payment terms are such that payment is due either within 30 or 60 days of service provided or delivery of parts.

 

As of March 31, 2018, the Company had deferred revenue of $18.5 million. This represents the portion of the transaction price for contracts with customers allocated to the performance obligations that remain unsatisfied or partially unsatisfied.  Short-term deferred revenue of $15.5 million represents performance obligations that will be satisfied within the next 12 months. This amount relates primarily to installation and non-standard warranty performance obligations for system sales. Long-term deferred revenue of $3.0 million relates primarily to unsatisfied extended warranty performance obligations that expected to be provided within the next 24 months.

 

Note 4.  Computation of Net Earnings per Share

 

Basic earnings per share is computed by dividing income available to common stockholders (the numerator) by the weighted‑average number of common shares outstanding (the denominator) for the period. The computation of diluted earnings per share is similar to basic earnings per share, except that the denominator is increased by the number of additional common shares that would have been outstanding if the potentially dilutive common shares issuable for stock options and restricted stock units had been issued, calculated using the treasury stock method.

 

The components of net earnings per share are as follows:

 

 

Diluted weighted average common shares outstanding does not include options and restricted stock units outstanding to purchase ten thousand and one hundred thousand common equivalent shares for the three month periods ended March 31, 2018 and 2017,  respectively, as their effect would have been anti-dilutive.

 

 

 

 

Note 5.  Accumulated Other Comprehensive Income

 

The following table presents the changes in accumulated other comprehensive income, net of tax, by component, for the three months ended March 31, 2018:

 

 

 

 

Note 6. Cash, cash equivalents and restricted cash

 

The following table provides a reconciliation of cash, cash equivalents, and restricted cash reported within the statement of financial position that sum to the total of the amounts shown in the statement of cash flows.

 

 

The restricted cash balance of $7.5 million as of March 31, 2018 which relates to (i) $5.9 million letter of credit associated with a security deposit for the lease of our corporate headquarters in Beverly, Massachusetts, (ii) $0.8 million letter of credit relating to workers’ compensation insurance, (iii) $0.7 million bank guarantee on a customer prepayment and (iv) $0.1 million deposit relating to customs activity. The restricted cash balance of $6.8 million as of March 31, 2017 includes the same items except for the bank guarantee.

 

Note 7.  Inventories, net

 

The components of inventories are as follows:

 

 

When recorded, inventory reserves reduce the carrying value of inventories to their net realizable value. The Company establishes inventory reserves when conditions exist that indicate inventory may be in excess of anticipated demand or is obsolete based upon assumptions about future demand for the Company’s products or market conditions. The Company regularly evaluates the ability to realize the value of inventories based on a combination of factors including the following: forecasted sales or usage, estimated product end of life dates, estimated current and future market value and new product introductions. Purchasing and usage alternatives are also explored to mitigate inventory exposure.

 

Note 8.  Product Warranty

 

The Company generally offers a one year warranty for all of its systems, the terms and conditions of which vary depending upon the product sold. For all systems sold, the Company accrues a liability for the estimated cost of standard warranty at the time of system shipment and defers the portion of systems revenue attributable to the fair value of non-standard warranty. Costs for non-standard warranty are expensed as incurred. Factors that affect the Company’s warranty liability include the number of installed units, historical and anticipated product failure rates, material usage and service labor costs. The Company periodically assesses the adequacy of its recorded liability and adjusts the amount as necessary.

 

The changes in the Company’s standard product warranty liability are as follows:

 

 

 

Note 9.  Fair Value Measurements

 

Certain assets on the Company’s balance sheets are reported at their fair value. Fair value is defined as the exchange price that would be received for an asset or paid to transfer a liability (an exit price) in the principal or most advantageous market for the asset or liability in an orderly transaction between market participants on the measurement date.

 

(a)  Fair Value Hierarchy

 

The accounting guidance for fair value measurement requires an entity to maximize the use of observable inputs and minimize the use of unobservable inputs when measuring fair value. The standard establishes a fair value hierarchy based on the level of independent, objective evidence surrounding the inputs used to measure fair value. A financial instrument’s categorization within the fair value hierarchy is based upon the lowest level of input that is significant to the fair value measurement. The fair value hierarchy is as follows:

 

Level 1 - applies to assets or liabilities for which there are quoted prices in active markets for identical assets or liabilities.

 

Level 2 - applies to assets or liabilities for which there are inputs other than quoted prices that are observable for the asset or liability, such as quoted prices for similar assets or liabilities in active markets; quoted prices for identical assets or liabilities in markets with insufficient volume or infrequent transactions (less active markets); or model-derived valuations in which significant inputs are observable or can be derived principally from, or corroborated by, observable market data.

 

Level 3 - applies to assets or liabilities for which there are unobservable inputs to the valuation methodology that are significant to the measurement of the fair value of the assets or liabilities.

 

(b)  Fair Value Measurements

 

The Company’s money market funds and short-term investments are included in cash and cash equivalents in the consolidated balance sheets and are considered a level 1 investment as they are valued at quoted market prices in active markets.

 

The following table sets forth the Company’s assets by level within the fair value hierarchy:

 

 

 

(c)  Other Financial Instruments

 

The carrying amounts reflected in the consolidated balance sheets for accounts receivable, prepaid expenses and other current assets and non-current assets, restricted cash, accounts payable and accrued expenses approximate fair value due to their short-term maturities.

 

Note 10.  Financing Arrangements

 

Sale Leaseback Obligation

 

On January 30, 2015, the Company sold its corporate headquarters facility in Beverly Massachusetts for $48.9 million. As part of the sale, the Company also entered into a 22-year lease agreement. The sale leaseback is accounted for as a financing arrangement for financial reporting and, as such, the Company has recorded a financing obligation of $47.7 million as of March 31, 2018. The associated lease payments are deemed to include both an interest component and payment of principal, with the underlying liability being extinguished at the end of the original lease term. The Company posted a security deposit of $5.9 million in the form of an irrevocable letter of credit at the time of the closing. This letter of credit is cash collateralized and the associated cash posted as collateral is included in long-term restricted cash.

 

Note 11.  Income Taxes

 

During the three months ended March 31, 2018 and 2017, we recorded an income tax provision of $3.6 million and $11 thousand, respectively. The change in the income tax provision for the current quarter compared to the prior year was primarily due to the release of a  significant portion of our valuation allowance in the fourth quarter of 2017. Prior to the release of the valuation allowance, the Company reported in its consolidated statements of operations only the amount of taxes actually payable. Subsequent to the release of the valuation allowance, tax expense also reflects the tax liability that would be payable without consideration of the usage of any net operating loss carryforwards. We have significant net operating loss carryforwards in the United States and certain European jurisdictions, and, as a result, we do not currently pay significant income taxes in those jurisdictions.

 

At December 31, 2017, the Company had $90.3 million of deferred tax assets worldwide relating to net operating loss carryforwards, tax credit carryforwards and other temporary differences, which are available to reduce income tax liabilities in future years.

 

On December 22, 2017, the Tax Cuts and Jobs Act ("TCJA") was enacted into law, which significantly changed existing U.S. tax law and includes numerous provisions that affect our business, such as reducing the U.S. federal statutory tax rate and adopting a territorial tax system. The TCJA reduces the U.S. federal statutory tax rate from 35% to 21%, effective January 1, 2018. The TCJA also includes a provision to tax global intangible low-taxed income ("GILTI") of foreign subsidiaries and a base erosion anti-abuse tax ("BEAT") measure that taxes certain payments between a U.S. corporation and its subsidiaries. The Company considered the available guidance and has incorporated the relevant provisions of GILTI into the income tax provision and concluded that the provisions of BEAT do not apply to the Company at this time.

 

In accordance with Staff Accounting Bulletin (“SAB”) 118, the Company disclosed in its 2017 Annual Report on Form 10-K that it is able to determine a reasonable estimate for certain effects of tax reform and has recorded that estimate as a provisional amount. The Company intends to use the one-year measurement period to update the provisional amount recorded as it finalizes its analysis relating to certain matters, such as developing interpretations of provisions to the TCJA, changes to certain estimates and amounts related to the Earning and Profits of certain subsidiaries and the filing of tax returns. Also, Treasury regulations, administrative interpretations, or court decisions interpreting the TCJA may require further adjustments and changes to the provisional amounts. As of the first quarter 2018, the Company has not made any changes to its estimate for the transition tax liability.

 

Note 12.  Concentration of Risk

 

For the three months ended March 31, 2018, two customers accounted for 25.9% and 15.4% of total revenue, respectively. For the three months ended March 31, 2017, four customers accounted for 19.2%, 16.6%, 16.4% and 16.3% of total revenue, respectively.

 

At March 31, 2018, three customers accounted for 18.1%, 17.3% and 11.1% of accounts receivable, respectively. At December 31, 2017, three customers accounted for 19.8%, 11.8% and 10.6% of accounts receivable, respectively.

 

Note 13.  Contingencies

 

(a)  Litigation

 

The Company is, from time to time, a party to litigation that arises in the normal course of its business operations. The Company is not presently a party to any litigation that it believes might have a material adverse effect on its business operations.

 

(b)  Indemnifications

 

The Company’s system sales agreements typically include provisions under which the Company agrees to take certain actions, provide certain remedies and defend its customers against third-party claims of intellectual property infringement under specified conditions and to indemnify customers against any damage and costs awarded in connection with such claims. The Company has not incurred any material costs as a result of such indemnifications and has not accrued any liabilities related to such obligations in the accompanying consolidated financial statements.

 

Note 14.  Recent Accounting Guidance

 

Accounting Standards or Updates Adopted

 

In May 2014, the Financial Accounting Standards Board (“FASB”) issued Accounting Standards Update (“ASU”) No. 2014-09, “Revenue from Contracts with Customers,” which provides guidance for revenue recognition. The standard’s core principle is that a company will recognize revenue when it transfers promised goods or services to customers in an amount that reflects the consideration to which the company expects to be entitled in exchange for those goods or services. In April 2016, the FASB issued ASU 2016-10, “Revenue from

Contracts with Customers” (Topic 606): Identifying Performance Obligations and Licensing, which further clarifies performance obligations in a contract with a customer. In May 2016, the FASB issued ASU 2016-12, “Revenue from Contracts with Customers” (Topic 606): Narrow-Scope Improvements and Practical Expedients, which provides a more narrow interpretation of ASU No. 2014-09. In July 2017, the FASB issued ASU 2017-13, “Revenue Recognition (Topic 605), Revenue from Contracts with Customers (Topic 606), Leases (Topic 840), and Leases (Topic 842), which clarify the transition periods related to public and private business entities.  These ASUs (collectively referred to as “Topic 606”) are effective for annual reporting periods beginning after December 15, 2017 and interim periods within those annual periods.

 

Effective January 1, 2018, we adopted FASB ASC Topic 606, Revenue from Contracts with Customers, or ASC 606. In accordance with ASC 606, we changed certain characteristics of our revenue recognition accounting policy as described below. In our adoption, ASC 606 was applied only to open contracts using the modified retrospective method, where the cumulative effect of the initial application is recognized as an adjustment to opening retained earnings at January 1, 2018. Therefore, comparative prior periods have not been adjusted and continue to be reported under FASB ASC Topic 605, Revenue Recognition, or ASC 605.  

 

In accordance with the new revenue standard requirements, the disclosure of the impact of adoption on our consolidated statement of operations for the three months ended March 31, 2018 and consolidated balance sheet as of March 31, 2018 was as follows (in thousands):

 

 

The impact of the adoption of ASC 606 on consolidated statements of comprehensive income and cash flows for the three months ended March 31, 2018 was not material.

 

Upon adoption of ASC 606, we changed our accounting policy for the installation performance obligation included in all system sales. Previously under ASC 605, the Company deferred revenue for the greater of the fair value of the installation or the portion of contract consideration for which collection was contingent upon

installation completion (the “retention”). The concept of contingent consideration is no longer relevant under ASC 606 and therefore we will only defer the portion of the transaction price allocated to the installation performance obligation. As a result of this change, we recorded a cumulative effect adjustment to increase retained earnings and decrease deferred revenue on January 1, 2018 by $1.6 million. Upon the adoption, all new contracts will be accounted for under ASC 606. Disclosures related to the nature, amount and timing of revenue and cash flows arising from contracts with customers are included in Note 3.

 

In August 2016, the FASB issued ASU No. 2016-15 “Classification of Certain Cash Receipts and Cash Payments.” The ASU is intended to add or clarify guidance on the classification relating to specific cash flow receipts and payments in the statement of cash flows and to eliminate the diversity in practice related to such classifications. The guidance in ASU 2016-15 is required for annual reporting periods beginning after December 15, 2017, and is to be applied retrospectively for each period presented. Adoption of ASU 2016-15 had no material effect on our consolidated financial statements and disclosures.

 

In March 2017, the FASB issued ASU No. 2017-07 “Compensation – Retirement Benefits (Topic 715): Improving the Presentation of Net Periodic Pension Cost and Net Periodic Postretirement Benefit Cost.” The ASU is intended to improve the presentation of net periodic pension cost and net periodic postretirement benefit cost. The amendment applies to all entities offering a defined benefit pension plan, other postretirement benefit plans, or other types of benefits accounted for under Topic 715. The amendments in the ASU require an employer to report the service cost component in the same line item or items as other compensation costs arising from services rendered by the pertinent employees during the period. The other components of net benefit cost are required to be presented in the income statement separately from the service cost component and outside a subtotal of income from operations. The amendments in this ASU are effective for public business entities for annual periods beginning after December 15, 2017, including interim periods within the annual period. The amendments in this ASU should be applied retrospectively for the presentation of the service cost component and the other components of net periodic pension cost and net periodic postretirement benefit cost in the income statement and prospectively, on and after the effective date, for the capitalization of the service cost component of net periodic pension cost and net periodic postretirement benefit in assets. Adoption of ASU 2017-07 had no material effect on the consolidated financial statements and disclosures.

 

Accounting Standards or Updates Not Yet Effective

 

In February 2016, the FASB issued ASU No. 2016-02 “Leases.” The ASU requires lessees to recognize the rights and obligations created by most leases as assets and liabilities on their balance sheet and continue to recognize expenses on their income statement over the lease term. It will also require disclosures designed to give financial statement users information on the amount, timing, and uncertainty of cash flows arising from leases. The guidance is effective for annual reporting periods beginning after December 15, 2018, and interim periods within those years. Early adoption is permitted for all entities. We are currently evaluating the impact of ASU 2016-02 on the consolidated financial statements and disclosures. The Company anticipates adopting the new standard on January 1, 2019 using the modified retrospective approach with the primary effect of adopting the new standard to be the recognition of additional assets and corresponding liabilities related to operating leases. The adoption is not expected to have a material impact on the Company’s results of operations and cash flows.

Item 2.  Management’s Discussion and Analysis of Financial Condition and Results of Operations.

 

Certain statements in "Management's Discussion and Analysis of Financial Condition and Results of Operations" are forward-looking statements that involve risks and uncertainties. Words such as may, will, should, would, anticipates, expects, intends, plans, believes, seeks, estimates and similar expressions identify such forward-looking statements. The forward-looking statements contained herein are based on current expectations and entail various risks and uncertainties that could cause actual results to differ materially from those expressed in such forward-looking statements. Factors that might cause such a difference include, among other things, those set forth under "Liquidity and Capital Resources" below and under “Risk Factors” in Part II, Item 1A to our annual report on Form 10-K for the year ended December 31, 2017, which discussion is incorporated herein by reference. Readers are cautioned not to place undue reliance on these forward-looking statements, which reflect management's analysis only as of the date hereof. We assume no obligation to update these forward-looking statements to reflect actual results or changes in factors or assumptions affecting forward-looking statements, except as may be required by law.

 

Overview

 

Axcelis is a producer of ion implantation and other processing equipment used in the fabrication of semiconductor chips in the United States, Europe and Asia.  In addition, we provide extensive worldwide aftermarket service and support, including spare parts, equipment upgrades and maintenance services to the semiconductor industry.  Consolidation and partnering within the semiconductor manufacturing industry has resulted in a small number of customers representing a substantial portion of our business.  Our ten largest customers accounted for 87.6% of total revenue for the three months ended March 31, 2018.

 

Our product development and manufacturing activities occur primarily in the United States.  Our equipment and service products are highly technical and are sold primarily through a direct sales force in the United States, Europe and Asia. In the first quarter of 2018, we signed an agreement with Screen Semiconductor Solutions Co., Ltd., a Japanese semiconductor equipment company, to establish a sales and service network to distribute Purion products to customers in Japan.

 

In the first quarter of 2018,  higher revenues were the result of customers’ increasing selection of Purion ion implanters due to strong spending by customers serving the memory and mature process technology segments.     

 

Critical Accounting Estimates

 

Management’s discussion and analysis of our financial condition and results of operations included herein and in our Annual Report on Form 10-K for the year ended December 31, 2017 are based upon Axcelis’ consolidated financial statements, which have been prepared in accordance with accounting principles generally accepted in the United States. The preparation of these financial statements requires management to make estimates and judgments that affect the reported amounts of assets, liabilities, revenue and expenses and related disclosure of contingent assets and liabilities. On an on-going basis, we evaluate our estimates and assumptions. Management’s estimates are based on historical experience and on various other assumptions that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates under different assumptions or conditions.

 

Management has not identified any need to make any material change in, and has not changed, any of our critical accounting estimates and judgments as described in Management’s Discussion and Analysis of Financial Conditions and Results of Operations included in our Annual Report on Form 10-K for the year ended December 31, 2017.

 

Results of Operations

 

The following table sets forth our results of operations as a percentage of total revenue:

 

 

Revenue

 

The following table sets forth our revenue:

 

 

Three months ended March 31, 2018 Compared with Three months ended March 31, 2017

 

Product

 

Product revenue, which includes system sales, sales of spare parts, product upgrades and used systems was $116.0 million, or 95.0% of revenue during the three months ended March 31, 2018, compared with $82.0 million, or 94.3% of revenue for the three months ended March 31, 2017. The $34.0 million increase in product revenue for